1. The working part of a filament lamp is a metal coil which glows white hot.

2. By Contractile proteins, we mean actin (thin filament) and myosin (thick filament)

3. d = actual filament diameter

4. Filament density steady and tensile force.

5. Filament tow of acrylic or modacrylic

6. In case of filament lamps with two filaments, the centre of the major filament shall be taken.

7. Tungsten filament are used to radiate light.

8. The stamen is made up of two parts: the filament and the Anther; the filament holds and positions the Anther.

9. Tropomyosin adds structural rigidity to the thin filament.

10. Analysis of spectropolarimetric data and of the large amplitude oscillations that the filament exhibited should enhance understanding of the solar filament eruption.

11. 4 words related to Chromatid: chromosome, fibril, filament, strand

12. Thin kelp is cut grow about 1 centimeter filament.

13. Combing is the opposite to standard travelling where filament is retracted, the head moved in a straight line and filament primed

14. An apparatus and process for applying finish to an expanded filament array in a quench system with air directed inward to the filament bundle.

15. Since the filament is coiled, the increase of the filament current will consequently induces a larger electromagnetic force between the coils. We calculate t...

16. 4 words related to Chromatid: chromosome, fibril, filament, strand

17. Brushoff utilizes an especially designed microscopically fine special filament

18. d2 is the actual diameter of the driving-beam filament.

19. The other bud splits the ATP and releases enough energy for the cross bridge to pull or slide the actin filament alongside or over the myosin filament.

20. Bristle definition is - a short stiff coarse hair or filament

21. Tungsten halogen filament lamps, excluding ultraviolet or infra-red lamps

22. 3.9.2. For 12-volt filament lamps light sources emitting white light:

23. One of the buds of the myosin filament head latches onto one of the now-exposed active sites on the actin filament, forming a cross bridge.

24. Bafflements babblement affluently affluent bailment affluents Blumenthal effluent babblements filament

25. d2 is the actual diameter of the driving beam filament.

26. Metal seals, metal oil seals, metal shims, metal ring seals, metal washers, metal gasket rings

27. Atomstack Cambrian, the most advanced 3D printer for elastic rubber filament

28. 17/ d1 is the actual diameter of the passing beam filament.

29. And what that does is it pushes on the Actin filament

30. ADDITIONAL REQUIREMENTS CONCERNING THE MARKING OF AND MARKS ON FILAMENT LAMPS

31. The light emitted from standard filament lamps shall be amber or white.

32. Diamond film was coated by the hot filament chemical vapor deposition method.

33. Liners of metal, oil seals of metal, metal gaskets, metal seal rings, metal oil retainers

34. (122) d1 is the actual diameter of the passing-beam filament.

35. Since the filament is coiled, the increase of the filament current will consequently induces a larger electromagnetic force between the coils. We calculate the electromagnetic force of in...

36. Solar Filament Coalesces in Sun's Atmosphere Source: NASA's Goddard Space Flight Center Published: November 30, 2017 In August 2012, a long filament of solar material coalesced in the Sun's atmosphere

37. Results The nuclear matrix - lamina - intermediate filament fine network remained after selective extraction.

38. Key Terms: Contractile Filament, F- Actin, G-Actin, Muscle Contraction, Myosin, Polymerization

39. I can see clearly that the filament in the bulb is broken.

40. An electric light passes electricity through material called a filament or wire.

41. The intensities shall be measured with the filament lamp(s) continuously alight.

42. Once bound, cytochalasins essentially cap the end of the new actin filament.

43. No actual filament diameter restrictions apply but the objective is d max. = #,# mm

44. In wild-type plants, the stamen filament elongated just prior to anther dehiscence.

45. Correlation is negative at the 0.05 level with Filament size and Skein ratio.

46. A different force and speed is applied to the filament as it is pulled out of the extruder to define the width of the filament, most commonly 1.75 mm or 3 mm diameter.

47. Solar Filament Coalesces in Sun's Atmosphere Source: NASA's Goddard Space Flight Center Published: November 30, 2017 In August 2012, a long filament of solar material coalesced in the Sun's atmosphere

48. The filament position accuracy of the HS5 is comparable with H4 and HS1.

49. Cold cathode sensing tubes are more rugged than the glass, hot - filament tubes.

50. Distance bolts of metal, mounting plates of metal, handles of metal, adjustable feet of metal

51. The thread in the corolla is the short filament of a degenerated stamen. Sentencedict.com

52. It'should be possible to estimate the temperature of the filament from the light spectrum.

53. Ladders and scaffolding of metal, pot hooks of metal, stair treads (steps) of metal, running boards and nosings of metal, sills of metal, staircases of metal, wainscotting and laths of metal, awnings of metal, cornices and angle irons of metal, clothes hooks of metal, tubing, roofing of metal and wire gauze

54. Metal Acetylide synonyms, Metal Acetylide pronunciation, Metal Acetylide translation, English dictionary definition of Metal Acetylide

55. Metal railway materials, bollards of metal, floating docks of metal, mooring buoys of metal, anchors

56. Ceramic-to-Metal and Metal-to-Metal Brazed Assembly Services

57. Brasso Metal Polish Metal cleaning

58. Metal bins, metal storage containers

59. The main challenge was to find the right filament for printing clothes with.

60. Anglerfish often hunt by luring prey in with fleshy lobe filled with the filament

61. Lumen maintenance factor at the end of the nominal life (except for filament lamps);

62. Most Anthers occur at the tip of a slender, stemlike filament and have two lobes

63. 2/ No actual filament diameter restrictions apply but the objective is d max. = 1.1 mm.

64. No actual filament diameter restrictions apply but the objective is d max. = 1,1 mm.

65. The end view of the filament shall be obtained within the angular displacements tolerance limits (± #°

66. Pipes of metal or metal alloys covered in plastic, Junctions of metal for pipes, Shut-off valves of metal, control fittings of metal

67. An abrasive filament, a cloth or non-woven made of the filament and an abrasive device, e.g., sanding disk, incorporating the fabric, cloth or non-woven and methods of producing the same are disclosed.

68. Bollards of metal, floating docks of metal, mooring buoys of metal, anchors

69. Amatory is a alternative metal, nu metal, groove metal metalcore music artist

70. Impact and vibration resistant; comes with cast-in LED chips instead of fragile filament.

71. Actin refers to a protein that forms a thin contractile filament in muscle cells

72. The light fabric usually manufactured from fine number yarns and filament with little denier.

73. The pod-like Anther is attached to the stamen which presents as a slender filament

74. The filament winding using the new method was accurate and reliable in the string pattern.

75. Authentic Capricorn PTFE Bowden Tubing (1 Meter) XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips 4.8 out of 5 stars 1,757

76. Chutes of metal, security grilles of metal, pre-fabricated ditches of sheet metal

77. Ladders and scaffolding, not of metal, stair treads (steps), not of metal, running boards and nosings, not of metal, sills, not of metal, staircases, not of metal, wainscotting and laths, not of metal, awnings, not of metal, cornices and angle irons, not of metal, clothes hooks, not of metal, tubing, roofing and gauze, not of metal

78. The light emitted from filament lamps of normal production shall be amber (see also footnote 6).

79. A filament in the corner of the screen will glow when ghosts or clues are nearby.

80. Partitions, in particular mobile partitions, including motor-operated, of metal, doors of metal, in particular accordion doors, folding walls of metal, wall linings of metal, building panels of metal, mobile walls of metal, metal building materials, goods of common metal, included in class 6