1. Belt pulley for the output shaft of a gear, gear, electric motor, and output shaft.

2. Aircraft landing gear longitudinal force control

3. The motor shaft is connected to the gear shaft using a flexible Coupler

4. Landing gear wheels with side-mounted airfoils

5. Based on analysis of the machining difficulties of herringbone gear shaft, the same phase machining theory of the gear shaft is presented.

6. Landing gear of aircraft with air jet devices

7. (p) a landing gear strut or brace strut;

8. Aircraft landing gear with highly offset strut pivot axis

9. The gear set further engages an eccentric gear with a shaft attached to it so.

10. 7 - Landing gear: alu,with all the holes predrilled.

11. Brake linings for aeroplane landing gear, aerodynamic wings for aeroplanes

12. 20 Rigorously tested, this landing gear will withstand incredible loads.

13. Bell 209 Original AH-1G prototype with retractable skid landing gear.

14. Device for reducing the aerodynamic noise of an aircraft landing gear

15. Cam shaft/cam gear assembly and thrust strategy for engine using same

16. The cam component is contacted with the rolling wheel for driving the sector gear engaged with the engaging shaft gear.

17. A Balked landing is a go around in the landing configuration: flaps and slats at the required setting, gear down, etc

18. A gear rim is flange-mounted between two adjacent shaft ends, and engages with a vertically-swivelling pinion in the rotor turning gear.

19. Process and device for attaching an aircraft nose landing gear to an aircraft tractor

20. Type II Similar to Type I, but with pulsejet moved forwards, no landing gear.

21. It was destroyed on 28 January 1943 when its landing gear failed to extend.

22. A retractable wheel landing gear is optional and adds five kts to cruising speed.

23. The two linear Backlashes are related by: The angular backlash at the gear shaft is usually the critical factor in the gear application

24. for undertaking EADS Revima: maintenance, repair and overhaul of landing gear for commercial transport aircrafts

25. Poor ground visibility and relatively narrow landing gear track caused many losses on the ground.

26. Static test was completed for the landing gear, while the aircraft’s fatigue test is in progress.

27. This version also had some minor modifications to fuel system, avionics, air conditioning, and landing gear.

28. The ring gear (3) abuts the differential case (2) in the axial direction of the drive shaft.

29. The Nakajima Ki-4 was a biplane design with staggered wings and fixed divided landing gear.

30. A Countershaft transmission comprising: a first shaft having first and second gears connected to rotate; a second shaft having a third gear rotatable and fourth and fifth gears freely rotatably mounted in intermeshing engagement with the first and second gears respectively; an idler sixth gear in intermeshing engagement with the fourth gear; a

31. The plane had a non-retractable tricycle landing gear with a steerable nose wheel and disc brakes.

32. By 1945, the company had built 4.5 million bombs, 16,750 sets of landing gear, and 46,700 propeller blades.

33. Although the aircraft did not sell, the experience was used in the tail wheel landing gear NC.850.

34. The multi - wheel, multi - stanchion landing gear design has been selected by most of foreign large military transporter.

35. Our core competencies are hydraulic Actuation systems including landing gear, door Actuation, valves and manifolds, locking mechanisms (e.g

36. Each digit gear is to correspond to a respective digit in a code representing an absolute position of a shaft.

37. Countershaft found in: Transmission Countershaft, Transmission Countershaft, Countershaft Idler Gear, Countershaft 2nd and 5th Gear, Farmall H And M Hydraulic Dipstick, Counter Shaft Bearing, Oil Seal, Ball Bearing, Cup, Ford -..

38. Additionally, during start-up, the converter increases torque to the gear intake shaft by up to a factor of 3.

39. The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

40. For Airplanes that do have a landing gear control, the location varies, but it usually has a white rubber handle

41. The utility model is capable of simply and quickly detecting whether the joggle between the helical gear and the output shaft gear is satisfied and has simple conformation and convenient usage.

42. — for the joint venture: the provision of single-aisle commercial aircraft landing gear maintenance, repair and overhaul services in China.

43. Landing gear and wheel pants - aluminum, mounting and axle holes are pre drilled.Wheel pants are composite and ready for installation.

44. Interestingly, several aircraft components, such as the engine magnetos and ignition system, the altimeter, and the landing gear, have backups.

45. It is shown that the influence of nonlinear terms in the landing gear structural on the shimmy stability region is significant.

46. At one point, a tank-like tracked landing gear was also tried on the XB-36, but it proved heavy and noisy.

47. Focus is adjusted by turning the knob on the right, which turns a worm gear that is connected to a shaft with pinions.

48. The input shaft and drive gear (1) are in constant mesh with both Countershaft drive gears (2); when the input shaft turns, the Countershaft gears are in constant mesh with the “floating” mainshaft gears (3).

49. Arrestor was designed to determine the landing gear loads and airframe dynamic response to both soft ground and the runway surface roughness

50. Cam shaft device and method for manufacturing shaft and cam shaft device

51. The invention is based upon a method for adjusting a speed of a shaft in a gear selector box (10) on a motor vehicle.

52. Hand tools, namely, adjustable wrenches, chain wrenches, spreaders, spanner wrenchers, pry bars, jimmy bars, reversible ratchet sets, thread chasers, gear shaft and bearing pullers

53. SIZE CHECK Select a gear Coupling to connect a 500 HP, 1170 RPM electric motor to a drive high speed shaft of a maneuvering winch

54. Single-wheel landing gear was deemed too weak and was replaced by tandem bogies with 1,350 mm × 300 mm (53 in × 12 in) tires.

55. Choose from our selection of precision flexible shaft Couplings, flexible shaft Couplings, rigid shaft Couplings, and more

56. The eccentric shaft is constituted by shaft I (5) and shaft II (6) that are integrally arranged.

57. Choose from our selection of set screw shaft Collars, clamping two-piece shaft Collars, clamping shaft Collars, and more

58. The landing gear of the 727 were already down when an Air Traffic Controller alerted the Captain that they were on approach to the wrong airport.

59. Choose from our selection of shaft Couplers, including precision flexible shaft couplings, flexible shaft couplings, and more

60. Method for producing a constructed cam shaft and cam shaft

61. The gear Coupling is the most power intensive Coupling as it is designed, but the shaft to hub connection can be the weak point of the Coupling

62. On both occasions, the Aerodrome Number 5 landed in the water, as planned, because, in order to save weight, it was not equipped with landing gear

63. Slemon Park has successfully developed an aviation and aerospace industry specialized in avionics and related industries (rebuilding plane engines and building landing gear control boxes for planes).

64. Has specialized length rocking shaft, plate pulley and single-seat photograph elevating gear and so on urgently need equipments, they can supply the photography movie, the television, MTV.

65. The pump shaft and the cam shaft are not simultaneously rotated.

66. The Blenheim was one of the first British aircraft with an all-metal stressed-skin construction, retractable landing gear, flaps, a powered gun turret and variable-pitch

67. Gear Cards ~ Cogwheel Cards ~ Gear Note Cards ~ Gear Stationery ~ Embossed Gear Notes ~ Note Cards ~ Gears ~ Cogwheel ~ Thank You MyCellarCreations

68. Airframe, basic structure of an airplane or spacecraft excluding its power plant and instrumentation; its principal components thus include the wings, fuselage, tail assembly, and landing gear

69. “They allow for training in handling emergencies, such as engine fire, landing-gear collapse, tire blowout, total loss of thrust, inclement weather, wind shear, icing, and adverse visibility.”

70. Intake-gate shaft

71. The upper cam shaft and the lower cam shaft can have variable lobes.

72. In 1880, the sinking of another shaft, Shaft 3, began in neighboring Schonnebeck.

73. To this end, two research institutions combined their expertise in computational fluid dynamics (CFD) and computational acoustics with EU funding of the project NOISETTE (Landing gear noise attenuation).

74. Check ring gear and pinion gear teeth contact pattern.

75. Welcome to Civilized Galactic Gear Welcome to Civilized Galactic Gear Welcome to Civilized Galactic Gear

76. Hooshion Airdrop System Air Drop Release Delivery Device with Landing Gear Fish Bait Advertising Ring Thrower Air Thrower Drop Device Kit for DJI Mavic 2 Pro/Zoom Drone

77. At the time of the incident, aviation analysts speculated that it may have been the first instance of a complete landing gear failure in the 767's service history.

78. Carbon Arrows feature a carbon shaft, while wooden Arrows feature a wooden shaft.

79. Wild Bird Landing.

80. Engage landing sequence.