1. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material

2. In the design method the beam flexural stiffness is designed to give an adequate distribution of the interface stress so that the maximum stress in the wall does not exceed allowable limits.

3. In the design method the beam flexural stiffness is calculated to give an adequate distribution of the interface stress so that the maximum stress in the wall does not exceed allowable limits.

4. Key words: thermal pressure, water tank, ice cap, mathematical model, design charts, hoop stress, flexural stress.

5. 2005) for Allowable Stress Design and limit state design (LRFD)

6. For both types of beams the allowable stress is the same.

7. During flexural toppling, the major principal stress is oriented predominantly parallel with the slope surface.

8. Selection basis and method on allowable contact stress of rolling ball-socket nozzle were described. Based on empirical formula and test data, several factors affecting allowable stress were analyzed.

9. Steel that was considerably Brittler and had a lower allowable working stress

10. Allowable synonyms, Allowable pronunciation, Allowable translation, English dictionary definition of Allowable

11. Allowable stress design is based on the following design principles and assumptions: Within the range of Allowable stresses, masonry elements satisfy applicable conditions of equilibrium and compatibility of strains

12. Improved stress monitoring equipment and accurate loading computers have helped ensure that stresses are kept within allowable limits.

13. Vertical casting reduced not only flexural strength but also the capability of the fibres in resisting stress in the post-cracking stages.

14. Jan. 2010 The new Elaflon PTFE multipurpose hoses from ContiTech combine flexural fatigue strength and resistance to stress cracking with high temperature stability.

15. The Designer must read the Allowable load from the applicable table and adjust the Allowable load for all applicable design parameters for the anchor, such as spacing, edge distance, in-service temperature or Allowable-stress increase for short-term loads.

16. Start studying Allowable and Non-Allowable Assets

17. It was found that machine stiffness has no significant effect on the compressive strength, the flexural strength, or the critical stress intensity factor.

18. In order to estimate the flexural behaviour of reinforced concrete members, the stress–strain behaviour of the constituent materials must be well established.

19. Special attention has been paid to factors of safety and allowable stress, areas where a certain amount of controversy exists.

20. The invention relates to a piezo flexural transducer unit which contains at least two flexural transducers (4, 5).

21. Allowable stresses

22. The results obtained show that this new method of testing allows the acceleration of damage when the rate of flexural stress reaches about 60% of the rupture load.

23. Allowable errors

24. Allowable shearing stresses for shear walls should be taken as the sum of the Allowable shear stress given in Table 11.5 or 11.6 and one-fifth the average compressive stress produced by dead load at the level being analyzed, but not more than the maximum values listed in these tables.

25. Allowable definition, that may be allowed; legitimate; permissible: an Allowable tax deduction

26. TOTAL ALLOWABLE CATCHES

27. Said insulating board is composed of two layers having different resistances to flexural stress and/or from materials having different compressive strengths, the securing element being arranged therebetween.

28. Reduction of flexural vibration amplitudes of turbine rotors

29. Allowable definition is - permissible

30. Total Allowable Catches (TACs)

31. Total Allowable Catch (TAC)

32. Rebates and Allowable Discounts - Indicate other rebates or allowable discounts received from the exporter.

33. Maximum allowable hydrogen leakage.

34. Allowable: that may be permitted.

35. - essential maximum/minimum allowable limits;

36. My one remaining, allowable vice?

37. Allowable Age of Credit Documents

38. Maximum allowable back-pressure: ... kPa

39. Allowable/Non-Allowable Expenses by Fund Type Source Allowable Expenditures • All state appropriated Allowable expenditures • Awards, including employee cash awards • Food, beverages, and related expense • Flowers, flower arrangements, and plants • Holiday cards - mail or purchase

40. 1.3.2. Maximum allowable back pressure:

41. Find another word for Allowable

42. Allowable Costs (WSD15-15), dated

43. iii) Maximum allowable hydrogen leakage

44. Total allowable catch and fees:

45. Her expenses were allowable deductions.

46. (d)‘total allowable catch. (TAC) means:

47. (5) Total allowable catch and fees:

48. It's not allowable under union rules.

49. Synonyms for Allowable in Free Thesaurus

50. Decisions on total allowable catch or total allowable effort are insulated and separate from decisions on allocation.

51. (d) ‘total allowable catch’ (TAC) means:

52. Of the kind not allowable in politics.

53. Two mistakes are allowable in this game.

54. Allowable 'Allowable' is a 9 letter word starting with A and ending with E Synonyms, crossword answers and other related words for Allowable We hope that the following list of synonyms for the word Allowable will help you to finish your crossword today

55. Admix 500 is used to increase tensile, bond, and flexural strength of approved products

56. This guidance has enabled many taxpayers who had claimed less than the depreciation Allowable to claim the full depreciation Allowable

57. How to use Allowable in a sentence

58. Total allowable catch (TAC) and quotas for

59. Density, water absorption, thickness swelling, flexural strength and surface hardness were evaluated.

60. Piezo flexural transducer unit and piezo valve which is equipped with the same

61. Overload current is not exceed allowable values.

62. Deductions Allowable in selling a second home

63. Admittable (also: acceptable, admissible, allowable, eligible, receivable)

64. When the learn mode is activated, the controller receives an allowable data set and stores the allowable data set to memory.

65. Again s176 would prevent this loss being allowable.

66. Additive for controlling flexural bond strength, air entrainement and workability of mortar cement

67. The Allowable imprecision is based on within individual variation and Allowable bias is based on within individual and between individual biological variation

68. Allowable Cost and Payment (Aug 2018) (a) Invoicing

69. · Determination of total allowable catches of certain fish

70. Capital punishment is allowable only under exceptional circumstances.

71. The bending modulus of elasticity and flexural strength are very important in this connection.

72. MINIMUM ALLOWABLE SIZE OF ALIGNMENT MARKS SHOULD BE GIVEN .

73. Maximum allowable exhaust back pressure of the REC: ... kPa

74. An expanded allowable price range set during volatile markets.

75. The maximum allowable dosage is two tablets a day.

76. Key words: deflection, elastic, elastoplastic, flexural resistance, membrane force, membrane resistance, plates, steel, strains, stresses, transverse load.

77. Allowable Deflections, consists of seven members with Russell S

78. The maximum allowable number of marginally acceptable sample units.

79. 6 Capital punishment is allowable only under exceptional circumstances.

80. Allowable if related to and necessary for the performance of the sponsored project (Note: malpractice insurance is an Allowable cost of research programs only …