1. — Mats of low moisture-absorption capacity

2. Soil moisture assessment by heat capacity

3. — Thin sheets (voiles) of low moisture-absorption capacity

4. Soil moisture should be maintained above 50 % of field capacity.

5. Key soil parameters include depth, moisture holding capacity and infiltration rate.

6. These variables in turn alter moisture-holding capacity, chemical-binding capacity, aeration, and nutrient and trace element content.

7. Difference between the absolute moisture (Ha) and the wilting point (Cm).

8. * - SUPERFINE GLASS FIBRE OF LOW MOISTURE ABSORPTION CAPACITY*0 % *AIRBUS , F 28*

9. — Other boards and similar non-woven products of low moisture-absorption capacity

10. * - SUPERFINE GLASS FIBRE OF LOW MOISTURE ABSORPTION CAPACITY * 0 % * AIRBUS , F 28

11. * - SUPERFINE GLASS FIBRE OF LOW MOISTURE ABSORPTION CAPACITY*0 % *AIRBUS , CONCORDE , F 28*

12. Remaining moisture content for the eco 40-60 programme at rated capacity (Dfull)

13. Absorbability was analysed by measuring absolute moisture content of wood and by MRI.

14. The adhesive composition has superior fluid handling capacity, moisture vapor transmission and skin adhesion.

15. Excess Soil Moisture || Number of days at or above Field capacity || 3 230 days

16. Accordingly, the absolute moisture content in barks of greater thickness is considerably higher.

17. * - SUPERFINE GLASS FIBRE OF LOW MOISTURE ABSORPTION CAPACITY * - * 0 % * AIRBUS , CONCORDE , MERCURE , F 28

18. Remaining moisture content for the eco 40-60 programme at rated washing capacity (Dfull)

19. The amount of moisture required to restore a soil sample to its field capacity.

20. * - SUPERFINE GLASS FIBRE OF LOW MOISTURE ABSORPTION CAPACITY* - *0 % *AIRBUS , CONCORDE , MERCURE , F 28*

21. So this has increased and multiplied its capacity to keep the moisture in the soi

22. Remaining moisture content for the eco 40-60 programme at half rated capacity (D1/2)

23. Remaining moisture content for the eco 40-60 programme at quarter rated capacity (D1/4)

24. — Boards and similar non-woven products of low moisture-absorption capacity, covered with paper or metal

25. Lignocellulose to electricity with # % efficiency based on lower heating value (# % moisture) with capacity # MWe or higher

26. Moreover it increases the capacity of the skin to absorb moisture so tired skin becomes revitalized.

27. Remaining moisture content for the eco 40-60 programme at half rated washing capacity (D1/2)

28. As you age, this system performs with diminished capacity, depleting the skin’s ability to retain moisture.

29. Remaining moisture content for the eco 40-60 programme at quarter rated washing capacity (D1/4)

30. The manufactured aggregate material (154) may be adjusted for moisture content, density, heat capacity, and other parameters.

31. The dressing has a high moisture absorbing capacity, a high degree of flexibility and a good integrity.

32. Full sunlight and soil moisture at field capacity caused large differences in size between the two species.

33. However, willows restricted the capacity of C. angustifolium to exploit natural patches of soil moisture during establishment.

34. Substrate Soil texture, moisture-holding capacity, fertility, pH, salinity and contaminants will affect plant establishment and growth.

35. As a volume of air cools, its capacity to hold moisture decreases and it will eventually reach saturation.

36. The Granomat is a fully automatic moisture analyzer with nondestructive measurement working on the priciple of electrical capacity.

37. 3.0% FS or 0.6 m/s absolute difference Stack gas moisture monitor* Low level (0 - 20% FS)

38. The highly concentrated collagen has high water-binding capacity, thus ensuring an intensive moisture transfer to the skin.

39. the residual moisture content after washing is calculated as the weighted average, according to each drum’s rated capacity;

40. 128 Consequently, the concept of capacity should be taken to mean absolute maximum production.

41. Factors influencing boron adsorption to soil include soil pH, texture, organic matter, cation exchange capacity, moisture and temperature.5

42. 10.0% RA or 0.6 m/s avg. absolute difference Stack gas moisture monitor* Minimum safe and stable load

43. Flow capacity of pressure relief valve- in m#/min. of air at # kPa absolute and # °C

44. Humidity may be given as absolute or relative, or even as a temperature reflecting moisture content, such as dew point.

45. The water adsorption capacity, expressed as equilibrium moisture content (EMC), was measured at a high relative humidity (RH ∼100%, 21 °C).

46. Fuel consumption must be analysed in relation to load capacity for goods and not in absolute figures.

47. DampRid Hanging Moisture Absorber Bag eliminates excess moisture DampRid Hanging Moisture Absorber Bag eliminates excess moisture that causes dampness and musty odors

48. When compared with predicted values obtained from calibrated models, moderate predictability of duff moisture was found (mean absolute error = 20.7%–54.2%).

49. The value of the absolute moisture of the sample will be measured and automatically corrected as a function of all said parameters.

50. Homes with mould problems are more likely in areas with high absolute humidity, and having a high number of occupants (generating moisture).

51. Absolute values after shock — Liabilities (after the loss absorbing capacity of technical provisions) — Equity risk — qualifying infrastructure equities

52. Flow capacity of pressure relief valve in m3/min. of air at 100 kPa absolute and 15 °C.

53. Flow capacity of pressure relief valve — in m3/min. of air at 100 kPa absolute and 15 °C.

54. Absolute values after shock – Liabilities (after the loss absorbing capacity of technical provisions) – Equity risk – qualifying infrastructure equities

55. Brining or salting is a way of increasing the moisture holding capacity of meat resulting in a moister product when it is cooked

56. Absolute values after shock — Liabilities (before the loss absorbing capacity of technical provisions) — Equity risk — qualifying infrastructure equities

57. In absolute terms, production and sales increased but the utilization rate remained stable due to the expansion of capacity;

58. A good fit was derived for the trends and general evolutions of moisture contents, with much better absolute-value approximations for the AAC samples.

59. Hereby, a formulation capable of describing known non-Fickian effects, including the effects of step size, absolute moisture content, and sample length, is achieved.

60. Moisture content

61. □ Practice moisture control.

62. Common types are dielectric moisture meter, infra - red absorption type moisture meter, etc.

63. Absolute Authentics absolute Authentics absolute Authentics absolute Authentics

64. FINAL MOISTURE CONTENT

65. The Commission proposal does not foresee the granting of priority for specific traffic types, in the absence of absolute scarcity of capacity.

66. Absolute Authentics absolute Authentics absolute Authentics

67. Apparatus for moisture absorption

68. Moisture content: Max 8,0 %

69. This substrate enables pits or grooves to be accurately transferred, is less likely to cause warpage derived from absorption of moisture, and has a high-density recording capacity.

70. ‘(i) Project which results in a capacity expansion in a sector facing serious structural overcapacity and/or an absolute decline in demand: 0.25

71. Moisture-setting polyurethane adhesive

72. Moisture absorbing cleaning apparatus

73. Moisture/dry matter content

74. DETERMINATION OF MOISTURE CONTENT

75. (i) Project which results in a capacity expansion in a sector facing serious structural overcapacity and/or an absolute decline in demand: 0,25;

76. (i) Project which results in a capacity expansion in a sector facing serious structural overcapacity and/or an absolute decline in demand 0.25

77. Moisture Adsorbing Packets Requirement Chart

78. Alkyds possess good moisture and …

79. Protein content (13,5 % moisture content)

80. A plastic coating repels moisture.