Đặt câu với từ "abrasion hardness"
1. Such films exhibit superior hardness and abrasion resistance.
2. The ink segments meet automotive hardness and abrasion specification requirements.
3. Composition for polyurethane elastomer having high hardness and excellent abrasion resistance
4. Non-stick coating having improved abrasion resistance and hardness on a substrate
5. It possesses excellent corrosion resistance in combination with good strength and hardness/abrasion resistance.
6. CBN Borazon Wheels is second in hardness only to diamond with twice the hardness and four times the abrasion resistance of conventional abrasives.
7. ‘They are resistant to Abrasion and grease, and have good hardness.’ ‘This special elastomer is available in various properties of hardness and toughness and is resistant to Abrasion.’ ‘The lifeline is a long, heavy, braided rope that is resistant to Abrasion, sunlight, and moisture.’
8. The compositions have improved properties including solvent resistance, adhesion, hardness, abrasion resistance and mar resistance.
9. Pa 3200Gf - polyamide with 30% of glass powder with a higher hardness and resistance against abrasion.
10. Partners exploited silsesquioxanes, compounds that form cage or ladder structures and confer hardness and abrasion resistance.
11. The silicone-based hard coating is an abrasion resistant coating with hardness ranging from 1 to 10 gigaPascals.
12. A composition is provided for preparing a polyurethane elastomer, which is of high hardness and excellent abrasion resistance.
13. The nanoparticles impart a wide range of enhanced properties to the compositions such as hardness and abrasion resistance.
14. The resulting coated ceramic material has superior abrasion resistance, heat resistance, high hardness, and low co-efficient of friction.
15. In addition, abrasion may be minimized to improve durability, and the hardness of the transfer system may be adjusted.
16. Weathering caused a significant reduction in the abrasion and erosion resistance of the dearcoats and large increases in their hardness.
17. Nineteen different rock types were tested to obtain the relationships between Shore hardness, point load index, sound velocity, Schmidt hardness and porosity and uniaxial compressive strength, indirect tensile strength and abrasion resistance.
18. All the Korzilius products are frost-resistant, while floor tiles are also anti-slip and characterised by very high hardness and abrasion resistance.
19. The coating made by the novel non-stick coating composition can show a greater abrasion resistance, an increased surface hardness, and a longer wear.
20. Abrasion may be classified as flat Abrasion, edge Abrasion or flex Abrasion
21. Hardox 600 quenched and tempered martensitic phase low alloy abrasion resistant discrete plate with Brinell hardness of 600 in thickness range 10 mm to 30 mm.
22. When the composition is cured, the presence of the particles also helps improve physical properties such as hardness, modulus, abrasion resistance, refractive index, and the like.
23. Hyperion's Borazon® CBN is recognized as one of the greatest technological advancements for grinding hardened ferrous and superalloy materials and is second in hardness to diamond with twice the hardness and four times the abrasion resistance of conventional abrasives.
24. Coating compositions are provided that, when cured, provide a coating with low refractive index, surface hardness, scratch resistance, abrasion, resistance and good curability at low film thickness.
25. Water hardness adjustors
26. Apatite has a consistent hardness and serves as the index mineral for a hardness of 5 in the Mohs Hardness Scale.
27. Almandine has a hardness of 7 - 7.5 on the Moh’s Scale of Hardness
28. Rubies have a hardness of 9.0 on the Mohs scale of mineral hardness.
29. Abrasion-loss measuring device, abrasion-loss measuring method, abrasion-loss measuring program, and recording medium
30. Metal hardness testing machines
31. In terms of hardness, Chrysoberyl …
32. Apx-hardness and Apx-completeness
33. Abrasion resistant plate, quenched, hotrolled alloy steel, with a minimum hardness of 400 HBN up to 600 HBN, and imported under tariff code 7225.40.90.19 ("DILLIDUR" detailed specifications attached to original request).
34. Abrasion test
35. ABRASION TEST
36. Abrasion device
37. Abrasion tester
38. Hardness and Strength of Amphibolite
39. Elastic and thermoeleastic constants, abrasive hardness and indentation hardness were measured on AgClO3, NaClO3 and NaBrO3.
40. Hardox 400, or equivalent, quenched and tempered martensitic phase low alloy abrasion resistant discrete plate with Brinell hardness of 400, of a thickness smaller than 5 mm or greater than 70 mm.
41. Tipped with tungsten carbide segments, the Brazed tools provide a cutting surface with the combined characteristics of compressive strength, extreme hot hardness at high temperatures, and resistance to abrasion, corrosion and thermal shock
42. Birefraction: none Hardness: 5.5 - 6.5 Spec
43. Birefraction: 0.04 Hardness: 5 - 6 Spec
44. Abrasion-resistant materials
45. Cutting, polishing (abrasion)
46. Burnishing by abrasion
47. To provide a liquid curable resin composition which can produce transparent cured products with a high refractive index, high hardness, and superior abrasion resistance, and can be suitably used as a coating material.
48. He also investigated the hardness of solid materials and in 1890 developed an instrument to measure absolute hardness.
49. High abrasion factor.
50. Abrasion-resistant belt
51. Outsoles abrasion resistance:
52. Resistance to abrasion
53. Abrasion resistant fabric
54. Abrasion detection device, wind power generator equipped therewith, and abrasion detection method
55. Not only the high abrasion resistance, but also the 55 Shore A hardness of the timing belt meet the high requirements during coin transport extremely well, as far as precision and accuracy are concerned.
56. He had slipped from hardness into affability.
57. Birthstones By Mohs Scale of Hardness Ranking
58. Acetylated pine wood showed increased Brinell hardness.
59. Baryte is chemically inert and insoluble, but is soft with a hardness of only 3-3.5 on Moh’s Hardness Scale
60. EN #- Outsoles- Abrasion resistance
61. Abrasion resistant conveyor belt
62. Abrasion-resistant catalyst carrier
63. Abrasion-resistant composite sheet
64. Abrasion-resistant decor sheet
65. Abrasion instruments (machine tools)
66. Abrasion resistant coated wire
67. Silver alloys of exceptional and reversible hardness
68. Burnishing coins by abrasion
69. Abrasion and microslip test
70. The hardness of fusion zoon higher weld joint and lower base metal The hardness have no change at fusion depth direction.
71. O, hardness to dissemble! - How do you, Desdemona?
72. Steel Safeguard Inquiry Tribunal’s Recommendations for Exclusion Hardox 500, or equivalent, quenched and tempered martensitic phase low alloy abrasion resistant discrete plate with Brinell hardness of 500, less than 5 mm or more than 50 mm thick.
73. Weapons fashioned from Adamantine have a natural ability to bypass hardness when sundering weapons or attacking objects, ignoring hardness less than 20
74. The paper discusses the results in relation to Knoop hardness, Amsler wear, deep abrasion and petrography and concludes that the texture of the rock has the most important influence on the cost of production of polished slabs.
75. The hardness of an inner layer of a layer pair is, in addition, higher than the hardness of an outer layer.
76. Test of resistance to abrasion
77. Strong concrete is more Abrasion …
78. Cutting of materials by abrasion
79. Linings (abrasion sheets) of metal
80. Abrasion testing no longer required.