1. Detach the Red Security Bracket between the Turret Face and the Spindle Bulkhead

2. Then jog the turret along the Z- axis towards the spindle getting to the end of Z travel if possible

3. Spindle Galaxy

4. Centrosomes,Centrioles, Spindle Fibers.

5. 13 Involute spindle spindle: ideal bearing capacity and easy assembling and dismantling.

6. Carriage mounted spindle control lever.

7. This is a heavy duty turret lathe.

8. This ancient turret has attracted many visitors.

9. The spindle sweep measurement will show that the spindle axis is perpendicular to the table surface

10. The axis of the dragging spindle is equipped with mixing blades (11) which conform a mixing spindle with a direction of advance opposite to that one of the dragging spindle.

11. For flight testing, engineers used a dummy turret.

12. Spindle adapter flanges for machine tools

13. Now, carefully remove tool T- 2181 from the turret

14. Spindle shanks and thick red hands.

15. Attach the magnetic base to the spindle

16. This arrangement makes it possible to achieve a very small spindle advance with normal threads of the spindle-unit.

17. During automatic recovery, the spindle drawbar unclamps and you will hear a blast of air coming from the spindle nose

18. Turret 49A was located on or near the headquarters building.

19. Arm is the main working parts of ladle turret.

20. Spindle advance screw with draw bar actuator

21. Spindle motor having an electrostatic discharge path

22. The layer spindle was an early development.

23. Antherozoids • The antherozoid is spindle like and biciliate

24. Multiple spindle tapping unit produces high efficiency operation.

25. Roll-tilt ball turret camera having coiled data transmission cable

26. Jog the turret to the middle of X- axis travel

27. The turret gun chattered, disintegrating a makeshift barrier of rubble.

28. Guardian: version for UAE Marines with "Buran-N1" turret.

29. Guiding element for the spindle of a jack

30. Spindle bearing support for balancing universal joint shafts.

31. The nut has been worked on the spindle.

32. Using a spindle to form the yarn

33. This is an ideal spindle tree system.

34. This would have consisted of a Type 99 20mm cannon in a tail turret and in a turret on the top of the fuselage, forward of the wings.

35. SEATING: 9 Spindle Bowback Arm Chair in Oak

36. A case of spindle cell hemangioendothelioma is reported.

37. Tool holding fixtures for machine tools, in particular spindle adapters, spindle flange attachments, taper shanks, chucks, lengthening and reducing pieces for tools

38. The thread needs to be wound around the spindle.

39. In battle station mode, Trypticon uses Brunt's turret as his main cannon

40. This box will always display the current turret tool position

41. Centrioles involve in the synthesis and organizing of spindle fibers whereas centromeres provide a site of attachment to the spindle fibers

42. The turret has a 360-degree field of fire from the summit.

43. Forcing herself to climb the stairs, she eventually regained the turret room.

44. The Antherozoids: The antherozoid is spindle like and biciliate

45. The princess tried the spindle, but pricked her finger.

46. The Atlantic Croaker has a fusiform, or spindle-

47. Attach the magnetic base to the spindle nose

48. 17 The nut has been worked on the spindle.

49. Failed test pins... microcracks in the spindle, mag comp corruption...

50. Castings are machined on either special-purpose reaming machines or turret lathes.

51. The turret roof armour is improved and the smoke grenade launchers redesigned.

52. Bartizan, an overhanging wall-mounted turret projecting from the walls of ancient fortifications

53. My place was in the turret, to work and fight the guns.

54. Specialists in Roving Machine, Gill box Bobbiner, Hollow spindle etc

55. The shapes are created on the spindle using one template.

56. The cell then divides along the spindle apparatus orientation.

57. Disk storage device with improved spindle torque and acceleration

58. The spindle will turn at a maximum of 750rpm

59. Remember, spindle speed also affects outside diameter holding force

60. Suddenly she pricked her little finger on the spindle.

61. Spindle drive for an adjustment element of a motor vehicle

62. A primary induction power supply operably coupled to the spindle.

63. A spindle motor control circuit (20) for controlling the acceleration and position locking of a spindle motor (22) includes a first mode of operation whereby the spindle motor (22) is commutated through use of an external clock (32, 34).

64. Said regulating device is driven by an operating spindle (25) which can be driven by means of its own advancing motor (56), synchronously with the spindle (6) or with a speed difference predetermined in relation to said spindle (6).

65. Parts of the turret were recovered in a limited exploratory excavation in 2001.

66. He takes the best suite in the turret of the elegant Hotel Excelsior.

67. We use CNC sliding headstock lathes and automatic multi-spindle machines.

68. During the bombardment, a turret explosion on battleship USS Mississippi killed 43 sailors.

69. "Y" Turret No. 2 gun had loading problems and missed salvo 14 onwards.

70. Air pressure separates the turret head from its rest surface during indexing.

71. A small cupola on top of the turret held a machine gun.

72. The gun on the turret could be swivelled once in a minute.

73. During the war the single turret was removed on all surviving ships after 1942.

74. The C turret was out of action until the wreckage could be cut away.

75. Microscopically, there are spindle to oblong cells with hyperchromatism and pleomorphism.

76. The spindle in the plasmodial state is open and acentric.

77. The M-94 used 25 aluminium disks on a spindle.

78. Select program O02020 " Spindle Warm- up " and press [ SELECT PROGRAM ]

79. And we'll keep the spindle speed below the recommended 900 rpm

80. With the machine geometry verified, start the " Spindle Warm- Up " program