1. (4) Bending and tensile strength

2. Viscosity, elasticity, and tensile strength.

3. Key words: concrete, accelerated strength, tensile strength, admixtures, curing, splitting tensile strength, modulus of rupture, strength correlations.

4. Bslm-8BP-62: Typical Tensile Values

5. Filament density steady and tensile force.

6. The composition gives a cured article improved in tensile strength, tensile shear bonding strength, and adhesion to various adherends.

7. Portable sander having novel abrasive sheet tensile stress

8. “Alkalised jute fiber tensile properties,” BioResources 4(2), 566-588

9. Cellulose has been described as a “tensile material without peer.”

10. A ratchet spring provides tensile force to the ratchet pawl.

11. 13 Feature: excellent sealing and flexibility, tensile moderate, with static electricity.

12. Relieving the tensile pressure on the cable triggered aeroelastic flutter.

13. Bimanal Osn electrolysis Tensile performance of smart lapse and voluntary sterilization.

14. 7 To measure tensile strength and breaking elongation of single yard.

15. According to the present invention, the complex improves the adhesive force between a metal and a resin, and as for tensile strength, even after thermal shock tensile strength is maintained.

16. The allowable change in tensile strength should not exceed + 25 per cent.

17. The allowable change in tensile strength should not exceed +25 per cent.

18. minimum elongation at fracture of the metal chosen under tensile stress in %.

19. The allowable change in tensile strength shall not exceed +25 per cent.

20. These compressive stresses compensate for the tensile stresses produced by the bonding process.

21. Key words: code calibration, geometric properties, reliability, steel, tensile strength, yield strength.

22. As it only takes place under tensile stress, the plane of the Crazing …

23. Strain-Ageing is known to cause an increase in yield strength and ultimate tensile strength of reinforcing steel bars, while tensile elongation capacity will be less in strain-aged steel bars

24. Blackcap Admix Contractor Strength provides increased strength, resiliency and compressive and tensile PSI

25. Acetal is an engineering thermoplastic with high tensile strength, stiffness and fatigue endurance

26. 1 For the tensile strength of monofilament spun by arachnids was the key.

27. Longitudinal tensile forces from starting and acceleration, as well as compression from braking.

28. 15 The structure and tensile property of bast fiber of hibiscus was studied.

29. Method of concreting expanded hole for a construction pile and a tensile member

30. Acoustic pressure transferred to the plate results in tensile strain of the flexible extensions.

31. ● Bone has been described as “an engineering masterpiece of tensile, compressive and elastic strength.”

32. Biaxial geogrids are geosynthetic materials formed into a grid of integrally connected tensile elements

33. Admix 500 is used to increase tensile, bond, and flexural strength of approved products

34. Acoustic pressure communicated to the plate results in tensile strain of the flexible extension.

35. Witte specializes in precision machining of all size parts in high-tensile aluminium alloys.

36. Above 35% of the tensile strength at the loading age, the material exhibited viscoplastic behaviour.

37. || Number of bow anchor chains || Length of each chain || Tensile strength of each chain ||

38. || Number of stern anchor chains || Length of each chain || Tensile strength of each chain ||

39. Increasing the thickness of the adhesive layer had no significant influence on tensile bond strength.

40. A tensile stress opens the crack and pulls it through the slide resulting in fracture.

41. Tensile strength and flexibility have been assessed with the aid of a four point bending configuration.

42. They exhibit improved adhesion to various substrates, increased tensile strength and improved resistance to cracking.

43. Under excessive tensile strain, the tubes will undergo plastic deformation, which means the deformation is permanent.

44. Since the concrete expansion part is formed on the end of the construction pile or tensile member, the allowable bearing capacity of the construction pile or the pulling resistance of the tensile member can be significantly improved.

45. Conversely, low to moderate tensile strain and stress is associated with direct repair, or intramembranous ossification.

46. Ductility . A ductile material is one which can be drawn out permanently by a tensile force.

47. 11 The condition of uniaxial stress is approximated in prismatic bars subjected to pure axial tensile.

48. These include tensile strength, wet and dry tear strength, burst strength, air permeability, seal strength and integrity.

49. Amosite tensile strength and heat resistance made it a common additive for structural steel, as well

50. Flatwise tensile testing is used to measure bond strength of adhesives according to ASTM C297-61.

51. Summary: Signs (directions) of forces on FBDs are not matching up with the conventions used for tensile and Compressive stresses I have recently learned that, by convention, axial tensile stresses are positive and axial Compressive stresses are negative

52. Static bending properties and tensile strength increased as fiber L/D increased from 3 to 26.

53. Tensile strength, elongation at fracture and modulus of elasticity according to # in the direction of stresses

54. The minimum tensile strength R of the anchor chains shall be calculated using the following formulae:

55. Early age tensile creep of high strength concrete loaded during the first day after casting was studied.

56. (A = Absorbable, N = nonAbsorbable) Trade name Knot security Tensile strength Tissue reactivity Wound security (50% tensile strength) Nylon (N) Ethilon Good Good + Non‐Absorbable Polypropylene (N) Prolene Least Best ~ 0 Non‐Absorbable Silk (N) Silk Best Least +++ Non‐Absorbable …

57. The energy absorbing element comprises a molded polymeric block having tensile strength and elongation properties to absorb energy.

58. 23 As with tensile and bend testing, torsion testing may be done under various stress or displacement programs.

59. The combinable fatliquor SC, phosphate fatliquor, sulfited sperm oil EJB can increase the tensile strength of chrome leather.

60. ABS offers a good balance of impact, heat, chemical and abrasion resistance, dimensional stability, tensile strength, surface

61. The wording of this paragraph refers to accelerations representing tensile loads in the spine of the dummy.

62. Fire, and out shoots a piton...... followed by a high- tensile wire designed to support your weight

63. 29 The condition of uniaxial stress is closely approximated in prismatic bars subjected to pure axial tensile.

64. Fire, and out shoots a piton... followed by a high-tensile wire designed to support your weight.

65. Very long span Arches and Arches with a small rise may require steel reinforcement to resist tensile stresses.

66. The copper alloy has a local ductility index of greater than 0.7 and a tensile elongation exceeding 5 %.

67. C-Clamps from Ivy Classic and Westward are forged from high-tensile steel to hold heavy objects in place

68. DermaMatrix Acellular Dermis demonstrates a higher tensile modulus, or greater resistance to stretching and deformation in laboratory testing.

69. The stability of the geomembrane cover was evaluated with respect to acid leach, freeze-thaw and tensile stresses.

70. The material shall be considered to be acceptable if the tensile strength differs by no more than 25%.’

71. The flywheel material with the highest specific tensile strength will yield the highest energy storage per unit mass.

72. The invention concerns an anchor ring, in particular for the smooth-end pipe connection with axial tensile strength.

73. CBM sealed condition is bad under neutral plane at axial part where shows tensile stress in syncline structure.

74. Adjective Brittled having hardness and rigidity but little tensile strength; breaking readily with a comparatively smooth fracture, as glass

75. - Tensile strength, elongation at fracture and modulus of elasticity according to EN 61:1977 in the direction of stresses.

76. These tensile and compressive stresses are transferred through the bridge truss to chamber of the acoustic stringed instrument instead.

77. The tensile strength of anchor chains shall be stated according to a standard in force in a Member State.

78. Maximum hardness of 65 Rc is achieved with a 0.6% carbon content, although the alloy has low tensile strength.

79. This was the basis of the Bombay's wing, which had seven spars, with high-tensile steel flanges and alclad webs.

80. Calendered material typically has higher tensile properties, product uniformity, and unusually close gauge control when compared with extruded films