1. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

2. The bands at 1268, 1031, and 912 cm −1 originated from aromatic ring breathing vibration, Aromaticin-plane bending, and out-of-plane C–H bending of guaiacyl (G) units, respectively; those of syringyl (S) units were observed at 1328, 1223, and 1121 cm −1, respectively (Li et al

3. High radial bending stresses can occur in the plane radial surfaces of the Bellow rings, in addition to the circumferential stresses caused by internal pressure, as a consequence both of internal pressure and of axial tension or axial bending

4. In this paper, problems of bending of thin plates under the combined action of lateral loading and in-plane forces are studied by means of perturbation method.

5. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

6. Bending tool assembly for determining the bending angle

7. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material

8. The invention relates to an adaptive adjusting method for a bending tool assembly (1) for air bending sheet metal parts (7), wherein a die width w (12) of the snaker (3) can be varied in a direction normal to the displacement plane (6).

9. The classical Westergaard type stress function analysis for in-plane stress crack problems is adapted to classical bending of cracked plates for determination of mode-1 stress intensity factors.

10. Be careful of bending that spoon.

11. Air Bending Combat: Air Bending is known for being almost entirely defensive, however it is reputed to be the most dynamic of the four Bending Arts

12. Stimulation was achieved by bending of the hair, and defined by the direction, angle, and speed of bending.

13. Adequate correlation exists between bending MOE and bending strength with moisture content.

14. What does Bending mean? Information and translations of Bending in the most comprehensive dictionary definitions resource on …

15. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood

16. Bending results from a couple, or a Bending moment M, that is applied

17. Definition of Bending in the Definitions.net dictionary

18. Bending line This brochure deals with Bending of high strength steel for the trademarks Strenx, Hardox and Docol

19. We're bending the curve.

20. Aperiodic Tiling of the Plane Most tilings of the plane are periodic

21. This bending indicates the Cone …

22. Bending vibration frequency in aerofoils;

23. — Bending vibration frequency in aerofoils;

24. Bowed: bending downward or forward.

25. Astral Plane Surface Skin: The surface skin of an astral plane.

26. Bowing: bending downward or forward.

27. (4) Bending and tensile strength

28. The sun's gravitation was bending the beam of light.

29. Device for measuring the bending strength of flat consignments

30. Racetracks, all without Bending a single piece of metal

31. Bending: marked by a long series of irregular curves

32. Amob is world’s leading manufacturer for Tube Bending Machines, Pipe Benders, Angle Rolls and Section Bending Machines

33. Diffraction is the bending of light around an obstacle.

34. Lifting and Bending the right way

35. Bending angle α shall be 180°.

36. 'Unit of plane angle

37. Bending strength was also favourably affected.

38. Compression Bending is faster and has a lower per-unit tooling cost than many other tube Bending methods.

39. Traveling by plane instead of by boat is an example of Alternatively traveling by plane.

40. After many years of bending gears with a pair of pliers,

41. Arrangement for adjusting the bending resistance of an instrument arm

42. You may do a lot of lifting, twisting, and bending!

43. Touch your toes without bending your knees.

44. He was bending down tying his shoelaces.

45. The trees were bending before the storm.

46. Technically speaking, you are Bending it abou

47. Adjustment on upper roll for cone bending.

48. All you who are bending* the bow.

49. Battery cell bending apparatus comprising heating member

50. Ah... All that bending in the woods.

51. Rheumatism prevents him form bending his back.

52. Explore Bending of light between two media with different indices of refraction

53. Alternative characterisations include moduli of elasticity and rupture, and bending strength.

54. What does Circumflex mean? Bending around; curved

55. Bending Polycarbonate Sheet with a Heat Gun

56. He was bending over his desk, writing.

57. Machines for bending, folding and straightening metal

58. Caught me bending was nearer the mark.

59. The sailors are bending to the oars.

60. Several branches started bending towards the ground.

61. The windowsills possess remarkable bending STRENGTH and high coefficient of elasticity.

62. Bending device for the working rolls of a hot-rolling frame

63. My earliest recollections are of my mother bending over my cot.

64. The connection between the classical Möbius plane and the real affine plane can be found in a similar way between the minimal model of a Möbius plane and the minimal model of an affine plane.

65. Bending is one of the most common sheet metal fabrication operations

66. 3¿ or more and a bending strength of 300 kg/cm?

67. The sheet metal Bending height should be at least 2 times the thickness of the sheet metal plus the Bending radius, that is, H ≥ 2t + R.

68. Here, we propose a kirigami-structured highly Anisotropic piezoelectric network composite sensor that is able to monitor multiple information of joint motions, including bending direction, bending

69. 5 words related to Aquaplane: board, skim, plane, skim, plane

70. 5 words related to Aquaplane: board, skim, plane, skim, plane

71. Science is tied to "the plane of effects", but occultism is take to "the plane of causes."

72. 2" to 6" Bending Plug Kit

73. "Eleanor, " he whispered huskily, bending. "Oh, God, Eleanor..."

74. Tube Bending Basics Part 1 covers the general knowlege regarding materials, dies, benders, Center Line Radius, Bending gauge and cheater creation

75. Runs the length of the plane.

76. 2" to 4" Bending Plug Kit

77. The men bending down are taking a drink.

78. Use the simple program of CNC milling machine and stretch bending machine.

79. In the act of bending down, he slipped and hurt his back.

80. He was bending over his work at desk.