1. Peak to peak Amplitude is the difference between the positive and the negative peaks

2. Antinode is a point on a standing wave where the wave has a peak amplitude

3. Peak Amplitude is the difference between the mid-point of the signal and the positive peak

4. This very short noise has a peak amplitude of 170 dB sound pressure level and can make otologic injuries.

5. Both methods retain the spike peak-amplitude information, so that separation of the component single-unit populations can be carried out by the computer using this information.

6. The determination of the angle to be measured is effected starting from a ratio formation between the amplitude of the secondary voltage pulse associated with the selected transmitter coil (06) and a peak amplitude.

7. Bleats were recorded using an Audio-Technica AT835b microphone and a TASCAM HDP2 portable solid-state digital recorder (sampling rate: 48 kHz, amplitude resolution: 16 bits) at distances of 5–10 m.The recordings were transferred to an Apple Macintosh Macbook computer, normalized to 100% peak amplitude and saved as AIFF files (48-kHz sampling rate, 16-bit amplitude …

8. The water overflowed in the hand, going straight out to either side as the streams of water Continuously added their masses together.: This battery is Continuously charged by solar cells and the use of the cell obviates the need for separate charging of the battery.: Peak amplitude of subharmonic component was measured by Continuously averaging the acoustic spectrum until a steady value was