1. Geothermal adiabatic-isothermal heat sink exchange system

2. Refrigerating and isothermal cabinets and chambers, cold accumulators

3. The result was extremely positive: perfect isothermal and maximum aerodynamicists.

4. This buffer provides superior reaction conditions for isothermal Amplication applications

5. Adsorption–desorption isotherms and isothermal calorimetric heats of adsorption were measured.

6. The isothermal data for adsorption followed the Freundlich and Langmuir models.

7. The heat of adsorption of CO2 and C2H4 was determined by isothermal calorimetry.

8. The Compressibility of a fluid depends on adiabatic or isothermal process.

9. In contrast, free expansion is an isothermal process for an ideal gas.

10. This paper presents a mathematical model of calculating gas isothermal compressibility factor.

11. The boundary conditions were: Two isothermal walls at different temperatures, two horizontal adiabatic walls.

12. 3) In this class we have discussed two types of efficiency: Allocative efficiency and productive efficiency

13. Aerodynamic Efficiency

14. Volumetric efficiency

15. Isothermal, adiabatic expansion and compression, engine cycles, constant volume and constant pressure, refrigerators and heat pumps;

16. These dichotomies (between efficiency versus correctness, efficiency versus programmer time, efficiency versus high-level, et cetera.) are bogus.

17. Methods for operating such a system under adiabatic, isothermal, isobaric and isochoric conditions are described.

18. It can replace traditional isothermal anneal as advance heat treatment of roughcast of bearing rings.

19. Meanwhile, technical efficiency and factors' allocative efficiency are deteriorated with scale efficiency switching from being retrogressive to being progressive.

20. Loop-mediated isothermal Amplification (LAMP) uses 4-6 primers recognizing 6-8 distinct regions of target DNA

21. Allocative Efficiency Definition

22. Active mode efficiency

23. You can think of another notion of Efficiency, which is called pareto efficiency.

24. The thermal decomposition of ferrous sulphate heptahydrate was carried out in air under dynamic and isothermal conditions.

25. Efficiency and cost management discussion of the corporate efficiency ratio and administration expenses

26. In fluid mechanics and thermodynamics, Compressibility is also known as isothermal Compressibility or coefficient of Compressibility

27. We show that with increasing frequency, a transition from an isothermal to an adiabatic process occurs.

28. Information visibility drives efficiency.

29. [image] Energy efficiency class:

30. 42 Efficiency and cost management Discussion of the corporate efficiency ratio and administration expenses

31. Its economic efficiency, the social efficiency and the environmental protection value are the infinitude .

32. 27 Isothermal normalization can improve or eliminate the banded structure and duplex grain structure in forging blanks.

33. Isothermal remanent magnetization (IRM) acquisition and subsequent thermal demagnetization indicate that pyrrhotite is the dominant ferrimagnetic mineral.

34. The activation energy for dehydration of these four compounds has been calculated using non-isothermal thermogravimetric data.

35. FRAME: 170 A shallow lapse rate, an isothermal layer, or an inversion, is an indication of stable air.

36. The obtained kinetic data are the basis for computation of a reaction process under any condition, e.g. isothermal or adiabatic.

37. We had knowledge about the electromechanical efficiency and then we can calculate the aerodynamic efficiency.

38. hydraulic pump/motor volumetric efficiency

39. Aerodynamic efficiency enhancements for parachutes

40. Efficiency of Airports & Runway Operations

41. High-efficiency air sterilization apparatus

42. The most common types of Calorimeters are differential scanning Calorimeters, titration Calorimeters, isothermal micro Calorimeters, and accelerated rate Calorimeters.

43. Rolling circle amplification (RCA) is an isothermal nucleic acid amplification method which is simple, rapid, highly sensitive and specific.

44. Hg abatement efficiency and costs

45. However, the efficiency is low.

46. Hydraulic pump/motor volumetric efficiency

47. The reaction ordern=1 and the values of the activation energy agreed with the results of isothermal experiments.

48. The a.c. resistance is found to be in general different from the isothermal or the steady-state differential resistance.

49. A temperature difference is imposed between the two isothermal end walls and the other two walls are assumed to be adiabatic.

50. The second notion of efficiency, linked to values about competitiveness in a global economy, is allocative efficiency.

51. Within less than 1 millisecond the steep- fronted shock wave has traveled some distance ahead of the isothermal region.

52. The thermal decomposition of [Co(NH3)5Cl]Cl2 was studied under non-isothermal conditions, in dynamic air and argon atmospheres.

53. The isothermal decomposition and reduction of ammonium polyuranate (ADU) was investigated in the temperature interval 285–463° C in hydrogen.

54. Aerodynamic efficiency and engine fuel burn efficiency result in considerable lower emission of noise and greenhouse gases.

55. 0018e ECM High-Efficiency Circulator View

56. Advisory services relating to energy efficiency

57. To maximise efficiency as an operator.

58. 0026e ECM High-Efficiency Circulator View

59. Mercury abatement measures and their efficiency

60. Streamlining cars increases their fuel efficiency.

61. Engine embodiments primarily designed for aircraft propulsion and power generation incorporating the Carnot cycle for efficient combustion with typical embodiments including air compressors having one or more stages with isothermal compression and including combustion and expansion chambers having in part isothermal expansion before final adiabatic expansion.

62. Improving energy efficiency in adsorptive separation

63. Thus, heat insulation efficiency is improved.

64. Efficiency Profit Market share Communication Accountability

65. The efficiency provided by using Crunched …

66. The records reveal three consecutive phases in the development of the fog: i. inversion; ii. isothermal state; iii. approximately saturated-adiabatic lapserate.

67. 0015e3 ECM High-Efficiency Circulator View

68. Boiler vs Furnace - Understanding Efficiency Ratings

69. Cooperation in energy efficiency and conservation

70. High-efficiency heating sheet for vehicle

71. * efficiency of the business environment; and

72. Boundary layer analysis is performed for free convection in a saturated porous medium adjacent to non-isothermal vertical impermeable surfaces.

73. An estimation is given of the harmonic content of the pressure waveform under the limiting conditions of isothermal and adiabatic compression.

74. Abstract This research quantifies the scale of technical efficiency and cost efficiency of Colombian credit institutions, especially commercial banks.

75. - Invest in energy efficiency, wide-base tyres to increase rolling resistance, and more aerodynamic design to improve fuel efficiency;

76. The focus is on increased aerodynamic efficiency.

77. The present invention enhances image compression efficiency.

78. They have achieved higher levels of efficiency.

79. Friction lowers the efficiency of a machine.

80. 006e3 ECM High-Efficiency Hot Water Circulator