1. Heat regenerators, heat accumulators, heat pumps, heat exchangers, in particular plate heat exchangers, counterflow exchangers, countercurrent exchangers

2. Heat exchange module using latent heat material and heat accumulator system incorporating the same

3. Counterflow adsorption filter column for water treatment

4. Geothermal adiabatic-isothermal heat sink exchange system

5. Generator-absorber-heat exchange heat transfer apparatus and method and use thereof in a heat pump

6. Heat recovery in absorption and desorption processes using a reduced heat exchange surface

7. Heat pump type air conditioner with air exchange

8. Air to Air Heat Exchange The Air to Air Heat Exchanger is a closed loop cooling system which employs the heat pipe principle to exchange heat from an electrical enclosure to the outside

9. Vertical and horizontal integrated heat exchange units equipped with a waste heat recovery system

10. A process is adiabatic when no heat exchange occurs.

11. Air-cooled heat exchangers designed to cool a fluid by indirect heat exchange with air

12. The heat exchange module is usable as a condenser or an evaporator in a heat accumulator system.

13. The cavity (7) accommodates a heat exchanger (9) that can be supplied with a heat exchange fluid.

14. Apparatus designs for ammonia-water generator-absorber-heat exchange (GAX) systems.

15. These counterflow Condensers provide good performance at a minimum cost

16. The air preheater is defined by a compact heat exchange structure.

17. Liquid accumulator electrolyte may be used as a heat exchange media.

18. Method and device for minimizing adverse effects of temperature differential in a heat exchanger or heat exchange reactor

19. Heat exchange units; non-domestic air conditioning machines, refrigeration and freezing equipment

20. Combustion-heat exchange system having resonance chamber, for boiler or water heater

21. Too much water for the condenser tray or the heat exchange tubing.

22. Sludge hydrolysis device, a sludge hydrolysis method using the same, and a contact type of heat exchange unit and steam type of heat exchange unit provided in the sludge hydrolysis device

23. Humidity- and/or heat-exchange device, for example a plate heat exchanger, sorption rotor, adsorption dehumidifying rotor or the similar

24. Temperature and pressure swing moving bed adsorption process system using novel heat exchange system

25. The indoor unit cools or heats a space, and includes a first heat exchanger that performs heat exchange between air and refrigerant.

26. A novel heat exchange medium made from a clay and oil mixture for use in absorbing, retaining, and dispensing heat is provided.

27. The .................... process refers to temperature change without exchange of heat with the external air. 2.

28. Adesign calculation method has been proposed for the counterflow extraction process of partially miscible ternary systems.

29. Circulating air (4) is cooled by means of heat exchange with adiabatically cooled process air (6).

30. Credo allows for an effective exchange of heat to ensure comfortable thermal conditions for the sitter

31. The plate-shaped heat exchanger comprises a plurality of exchange plates separated by spacing elements (2).

32. This takes the temperature of the canal and turns it into this four- degrees of heat exchange.

33. In some cases, the stream is cooled by heat exchange with cold liquid EDC feed prior to quenching

34. The worst case is when the reaction occurs Adiabatically, that is, without any heat exchange with its surroundings

35. A solution heat exchanger disposed in a solution flow channel in an absorption refrigerating machine and used for heat exchange between a dilute solution and a concentrated solution.

36. According to the invention, the loaded absorption medium (6) is brought into heat exchange with the flue gas (5).

37. The multiple heat-conducting elements that set between the fins are closely adhibited the surface of the heat-dissipating element, the heat produced in operation by the light emitting diode illumination device is distributed uniformly on the heat-dissipating element and the fins by the effective heat exchange effect of the multiple heat-conducting elements and then dissipated.

38. Conflux Technology specialises in the use of metal additive manufacturing (AM) to achieve significant improvements in heat exchange applications

39. The auxiliary device comprises a housing for attaching to an air exchange device (1) having a heat exchanger (2).

40. A0600 Adiabatic warming (A0570) The thermodynamic transformation which occurs without the exchange of heat between a system and its environment.

41. The refrigeration system may include of a series of integrated adsorption beds and heat exchange means in a cascadable configuration.

42. It acts as a thermal insulator between biomes, preventing heat exchange between them as long as the Abyssalite boundary remains intact

43. During adiabatic processes, therefore, it is assumed that there is no: a. change in temperature b. exchange of heat with the external air

44. The present invention relates to an adsorption system for selective gas isolation, which uses a phased desorption and a novel heat exchange system.

45. A0520 Adiabatic cooling (A0570) Adiabatic warming, Dynamic warming The thermodynamic transformation which occurs without the exchange of heat between a system and its environment.

46. Condenser (heat transfer), a device or unit used to condense vapor into liquid.Specific types include: HVAC air coils; Condenser (laboratory), a range of laboratory glassware used to remove heat from fluids Surface Condenser, a heat exchange installed in steam-electric power stations to condense turbine exhaust steam into water

47. Advanced telecommunications computing architecture data exchange system, exchange board and data exchange method

48. Heat regenerating systems with heat accumulators, and with heat exchangers

49. Heat exchangers, heat exchanger systems, heat pumps, heat accumulators and parts for the aforesaid goods

50. After being used to liquefy the natural gas, the low-level refrigerant is (a) warmed by heat exchange (65) in countercurrent relationship with another stream of the low-level refrigerant and by heat exchange (65) against a first stream of the high-level refrigerant, (b) compressed to an elevated pressure, and (c) aftercooled against an external cooling fluid.

51. If an Exchange email address is entered, Exchange will retrieve the Exchange user's availability.

52. Bedwarmers (heaters), Footwarmers (electric or non-electric),Curling lamps (heat lamps), Hot water bottles, Heat exchangers, Heat accumulators, Heat regenerators, Heat pumps, Plate warmers, Pocket warmers, Solar modules for heat generation, Parabolic troughs for heat generation

53. In this way, the process air is adiabatically cooled and the corresponding cooling is carried out by means of heat exchange with the circulating air (4).

54. Has developed 6 core technologies – textile spinning, internet of things for industry, wastewAter treatment, heat exchange, print control and vision systems, and static and ink control.

55. Heat exchangers, in particular plate heat exchangers, heat pumps, heat regenerators and heat accumulators, and parts for the aforesaid goods, included in class 11

56. Furthermore, high-temperature vapor at the top end of the regeneration tower, and a portion of the flow which has absorbed carbon dioxide and is exiting an absorption tower undergo heat exchange to additionally heat the injection flow injected into the regeneration tower, thus reducing the amount of heat needed by the reboiler.

57. Heating apparatus, heating installations, air conditioning installations, heat regenerators, heat accumulators, heat exchangers

58. Heat or cold storage devices, heat accumulators

59. A0570 Adiabatic process Adiabatic cooling, Dynamic cooling Adiabatic warming, Dynamic warming The thermodynamic transformation which occurs without the exchange of heat between a system and its environment.

60. Stock Exchange

61. Gas and electric heat accumulators, heat regenerators

62. Auxiliary heat on the other hand uses heat strips together with the heat pump to supplement the loss of heat

63. Heating installations, heat accumulators, heat exchangers, heat pumps, coils, thermostatic valves, water heaters, water supply installations, heat transfer devices, kettles, boilers

64. Blistering definition: Blistering heat is very great heat

65. Method of heat accumulation and heat accumulation system

66. As the supporting equipment of cement rotary kiln, Clinker cooler (also called cement cooler) is a kind of heat exchange device that transfers heat from high-temperature Clinker to low-temperature gas.It plays an important role in the cement Clinker production process and

67. Specific heat content is high, good heat conduction.

68. An experimental study was carried out on the mean aerodynamic and heat-exchange characteristics of a weaklyheated air jet flowing over an isothermal and an insulating flat surface.

69. Brazed Plate Heat Exchangers; Brazed Plate Heat Exchangers

70. Vacuum double heat insulation container for heat retaining

71. Heat a lightly greased skillet over medium heat.

72. The efficiency of sensible heat and latent heat of rotate wheel heat exchanger were illustrated.

73. It is listed on the Korea Exchange stock-exchange (number 009150).

74. Heat pumps, air/water heat pumps, air/water heat pumps for installation by specialised professional operators

75. The heat benchmark is applicable for heat consumption processes where a measurable heat carrier is used.

76. Heat insulating panel with active regulation of heat transition

77. The high-level refrigerant is warmed by the heat exchange with the low-level refrigerant, compressed (67) to an elevated pressure, and aftercooled against an external cooling fluid (69).

78. Applications based on the heat exchange efficiency of the method of calculating the establishment of the surface cooler model, combined with two-phase loop thermosyphon model desiccant system model.

79. Heat Bammy griddle or fry pan over moderate heat

80. Heat exchanger, air conditioner, and heat exchanger manufacturing method