1. Backscattered synonyms, Backscattered pronunciation, Backscattered translation, English dictionary definition of Backscattered

2. Backscattered - find the meaning, anagrams and hook words with Backscattered and much more

3. Backscattered Electrons in SEM Imaging

4. Synonyms for Backscattered in Free Thesaurus

5. What are synonyms for Backscattered?

6. Typical position of the Backscattered and secondary electron detectors

7. Backscattered is playable in: Words With Friends 27

8. The radius in which the Backscattered electrons are produced

9. Backscattered spectral radiances, which can be integrated to obtain fluxes

10. Where EB is the exit energy of the Backscattered electrons.

11. Most Backscattered electrons come from relatively deep in the sample

12. Therefore, a well-defined modeling of the Backscattered echoes leading to

13. A Backscattered electron profile is also collected as the number of Backscattered electrons increases with atomic number, so atoms of a higher atomic number appear brighter in the image

14. Then, the backscatter detector was inserted into the microscope chamber and the same sections were viewed in the Backscattered electron imaging (BEI) mode, using a setting that maximized Backscattered electron signal, as follows: working distance 15 mm.

15. Backscattered electrons (BSE) and secondary electrons (SE) are the most important signals for image recording

16. Pyebsd is an python implemented open-source tool for processing Electron Backscattered Diffraction (EBSD) data

17. The number of backscattered electrons generated from the beam-to-sample interaction is described by a coefficient called Backscattering coefficient η and is defined as the ratio between the backscattered current IBSE and the probe current IP

18. The image is digitally captured with a resolution of down to 5 nm, Backscattered Electron Imaging.

19. And to understand how SEMs work, it’s important to grasp the concept of Backscattered electrons (BSEs)

20. The number of Backscattered electrons generated from the beam-to-sample interaction is described by a coefficient called backscattering coefficient η and is defined as the ratio between the Backscattered current IBSE and the probe current IP

21. By mixing Backscattered and secondary electron images it is possible to sum the two images together

22. It has SE (secondary electron), BSE (Backscattered electron), and EDAX (Energy-dispersive X-ray spectroscopy) detectors.

23. The waves that are backscattered from the test object are evaluated in that an acousto-electric transducer, which is located on a semiconductor crystal, detects the oscillations that are produced in the semiconductor crystal by the backscattered ultrasonic waves.

24. Since the Backscattered electron (BSE) signal from thin metal coating layers is quite low, field emission SE …

25. Backscattered electrons vary in their amount and direction due to the composition and topography of the specimen

26. Backscattered x-ray spectra at the water surface have been measured by using a small silicon diode detector

27. Validation of quantitative Backscattered electron imaging for the measurement of mineral density distribution in human bone biopsies Bone

28. There are two types of electrons used to produce an image in a SEM, namely, secondary and Backscattered electrons

29. Some of the alpha particles of a defined energy are backscattered to the detector if they collide with an atomic nucleus.

30. The word Backscattered uses 13 letters: a, a, b, c, c, d, e, e, k, r, s, t, t

31. نقطة واحدة * :The transducer (ultrasound generator) depend on Backscattered signals O Transmitted signals Both of them O نقطة واحدة *

32. SBED (Scintillator Backscattered electron detector) Use of scintillator for detector has improved detection sensitivity and responsiveness compared to semiconductor element.

33. They occur due to inelastic interactions between the primary electron beam and the sample and contain lower energy than the Backscattered electrons.

34. Backscattered electrons are electrons with energies E such that 50 eV < E < E*, where E* is the primary beam energy

35. Consequently, the number of Backscattered electrons (BSE) reaching a BSE detector is proportional to the mean atomic number of the sample

36. For the middle position (layer), Backscattered coefficient values were dependent on the probe size and corresponded to a mixture of gold-carbon.

37. Versatile Backscattered electron detector (VBED) enables acquisition of characteristic images such as 3D and surface topography based on divided detection element shape

38. Backscattered electrons, and their lateral spread (exit positions) relative to a plane con-taining the specimen normal and the beam incidence direction

39. The Backscattered coefficients at extreme positions (inside the matrix) of the line scans were always equal to the one of pure gold (0.467)

40. The total Backscattered field can also be written as the field scattered by the open-circuited antenna plus the re-radiated field [12]

41. Electron Backscattered Diffractometry (EBSD) is based on automatic indexing of electron backscatter diffraction patterns (EBSP) which can be produced in a properly equipped SEM

42. The RFID tags also encode the Backscattered data using either FM0 baseband or Miller modulation of a subcarrier at the data rate of transmission

43. Electron Backscattered Diffractometry (EBSD) is based on automatic indexing of electron backscatter diffraction patterns (EBSP) which can be produced in a properly equipped SEM

44. Backscattered electrons can also be used to form an electron backscatter diffraction image that can be used to determine the crystallographic structure of the specimen

45. Some of the crystals display an Allanitic core of few tens of microns, recognizable in crossed-polarized light and well visible in backscattered electron images

46. Double Layer Coating for Backscattered electron imaging is a coating and imaging method especially suitable for high resolution scanning electron microscopy (SEM) of large biological samples

47. Zircon in the Ririwai biotite granite, and its albitized and greisenized varieties, is described by reflected-light and backscattered-electron (BSE) microscopy, and electron-microprobe analysis.

48. Backscattered Radar Intensity A single radar image is usually displayed as a grey scale image, such as the one shown above.The intensity of each pixel represents the proportion of microwave Backscattered from that area on the ground which depends on a variety of factors: types, sizes, shapes and orientations of the scatterers in the target area; moisture content of the target area; frequency

49. Each element of the array emitted a short, high-amplitude pulse through the Aberrative layer toward the focus in tissue, and the imaging probe recorded the backscattered signal at …

50. An alternative and improved approach is to calculate the mean Backscattered electron (BSE) coefficient, η, from a knowledge of the elemental composition and values of η for the elements

51. The Backscattered values of Figure 5 indicate that the water column could be divided into three layers according to the backscattering strength: near surface, water column, and above bed

52. The radius of a hemispherical region from which Backscattered electrons are produced is- resolution is limited to the order of 2 x Radius, irrelevant of the diameter of the incident electron beam

53. For example: there is a secondary electron detector (SED) which detect only secondary electrons , and on the other hand there is the Backscattered electrons detector (BSE) which detect only BSE

54. Unlike secondary electrons, the Backscattered electrons escape from much deeper in the surface, most originating from about 1/3 or less the maximum depth of the electron beam/device interaction volume.

55. Those saturation count rates define the detection dynamic range as N max / N Bsmin + N BG, where N Bsmin is the minimum detectable backscattered signal photon counts for which SNR equals 1

56. Spacing between optical paths and detection fibers of each probe and between probes is optimized to minimize sampling of the adipose subcutaneous layer and to maximize collection of light backscattered from the cutaneous layer.

57. The contrast of the Backscattered electron image depends on multiple factors, including the atomic number (Z) of the sample material, the acceleration voltage of the primary beam and the specimen angle (tilt) with relation to the

58. The cross-section measured from the same direction as the incident radiation – the Backscattered power – is usually known as the radar scattering cross-section (RCS), since a radar receiver, like an RFID reader, looks for signals scattered back to the transmit location

59. Ultrasonic Backscattered echoes represent not only the impulse response of the ultrasonic transducer, but also contain information pertaining to the inhomogeneity of the propagation path, effect of frequency dependent absorption and scattering, dispersion effect, and geometric shape, size and orientation of reflectors

60. Backscattered-electron images of the cross sections were mostly taken at 20 kV accelerating voltage, at a 5 mm eucentric working distance and a spot size of 3, which corresponds to a beam diameter of 2.2 nm with current density of approximately 130 pA

61. In a monostatic configuration (Figure 4.1), a single antenna is employed to simultaneously transmit a CW signal to power the tag, and receive the Backscattered signal.If the receiver were simply connected directly to the transmitter, and both antenna and receiver were well-matched, half of