1. Passive vacuum cleaner nozzle with an air intake aperture

2. Intake and exhaust nozzle

3. The nozzle front edge (106) is convex and promotes non-turbulent air intake.

4. The underwater intake nozzle assembly may include a collector and a converging nozzle.

5. The intake air amount of an engine (1) is controlled by a variable nozzle (53) of a turbocharger (50).

6. Amount of intake air CO2 per mole of intake air

7. Shaft, propeller, stator vane, nozzle, rudder, intake grate, marine shafts

8. An underwater intake nozzle assembly is fluidly coupled to the turbine.

9. Furnace air intake?

10. air-intake pipes

11. For one embodiment, an underwater tower nozzle may be fluidly coupled between the turbine and the underwater intake nozzle assembly.

12. Air nozzle for ventilating or air conditioning installations

13. Nozzle devices for air conditioning and/or air humidifying

14. Air intake plenum for air induction channel

15. Intake air temperature (K)

16. Method for control of air intake and valve for air intake and its application

17. Amount of water in the intake air, based on a humidity measurement of intake air

18. A turbojet consists of an intake, compressor , combustor , turbine and a propelling nozzle .

19. A nozzle restricts exit of the ignited gas mixture from the intake chamber.

20. An air intake passage (44) communicates with the ambient exterior and also communicates with the Venturi passage between its nozzle (50) and diffuser (52).

21. The cold air within the nozzle throat cools the nozzle throat skin, which serves as air-conditioner core.

22. Absolute throttle position/intake air throttle position (position of valve used to regulate intake air)

23. absolute throttle position / intake air throttle position (position of valve used to regulate intake air)

24. Absolute throttle position / intake air throttle position (position of valve used to regulate intake air)

25. Impellers, shaft, stator vane, nozzle, intake grate, marine shafts and parts and fittings therefor

26. Aerodynamic forces continuously position the intake nozzle (2) along the direction of gas flow.

27. Hydropneumatic anti-hammer tank with an air intake and control device, and air intake method

28. An intake tube extends from the housing for receiving intake air.

29. Intake system with air filter

30. - air vents and intake valves,

31. clean air (ambient air, intake air, charge air, inlet manifold) temperature sensors;

32. Check air-intake level, 8 seconds.

33. Intake manifold air leak: A lean condition due to an intake manifold air leak can cause Backfiring.

34. This new ramjet consists of an air intake port (11), a diffuser stage (12), a fuel source (13), a combustion stage (14), and an exhaust nozzle (15).

35. Air intake valve (7), if fitted

36. Air intake valve (3), if fitted

37. Relative humidity of the intake air

38. Absolute humidity of the intake air

39. Combination valves for controlling intake air

40. Engine air intake shut off valve

41. Absolute temperature of the intake air

42. relative humidity of the intake air ( %)

43. Absolute humidity of the intake air.

44. For the intake air (if different from the dilution air):

45. (ii) clean air (ambient air, intake air, charge air, inlet manifold) temperature sensors;

46. Structure of air discharge port for dust clearing nozzle

47. Idle air intake control device of engine

48. humidity of the intake air water per kg dry air

49. The PA1 is the standard automatic air Atomizing nozzle

50. Air intake systems, including air cleaners and filters for cleaning air for engines

51. Ra= relative humidity of the intake air, %

52. — Air intake valve if fitted equipment (5)

53. humidity of the intake air, g water per kg dry air

54. Bursts of air or air/liquid mixture are generated, exiting through the nozzle tip.

55. The air Atomising nozzle is suitable for spraying viscous liquids

56. Sweeping broom apparatus having a surface tracking air blast nozzle

57. humidity of the intake air, gram of water per kg dry air

58. Engine intake system with accessible, interchangeable air filters

59. humidity of the intake air in g water per kg dry air

60. absolute humidity of the intake air, g water per kg dry air

61. Dry intake air density = 1.293 kg/m3 with

62. Intake air mass flow rate on dry basis

63. Air Atomizing nozzle usually used in air disinfection, Spraying injection, mold lubricating, moisturization, etc.

64. Air intake filters being parts for ventilating, air-conditioning or refrigerating apparatus

65. Air intake hood for turbine inlet filter house

66. instantaneous intake air mass flow rate [kg/s]

67. In order for said device to have a simple design and be efficient, the air inlet is embodied as a nozzle (14) that expands like a funnel and protrudes into the air intake zone of the tangential separator.

68. The charged spray enters through the air intake valves at the beginning of the intake stroke.

69. - Air Atomizing nozzles produce the finest mist of any nozzle type

70. A nozzle for providing particulate materials to a suction intake hose connected to a bulk transfer apparatus is provided.

71. Ha: absolute humidity of the intake air, g water per kg dry air

72. Ha = humidity of the intake air in g water per kg dry air

73. Dry to wet correction factor for the intake air

74. Vent door: movable panels used to regulate air intake.

75. Intake and exhaust valves for cylinder type air compressor

76. A diesel engine (E) has a combustion chamber (C), a piston (T) movable in the chamber, air intake and exhaust valves (IV, EV), and a nozzle (N) injecting fuel into the combustion chamber.

77. Intake and exhaust valves for a cylinder type air compressor.

78. R a= relative humidity of the intake air (per cent)

79. The relief valve (68) adjusts the air pressure of the air intake chamber (64).

80. This also involved methodology for estimating performance of the airframe and propulsion (intake, combustor and nozzle) during system design processes.