1. Furnace air intake?

2. air-intake pipes

3. Method for control of air intake and valve for air intake and its application

4. Hydropneumatic anti-hammer tank with an air intake and control device, and air intake method

5. Check air-intake level, 8 seconds.

6. Air intake valve (7), if fitted

7. Air intake valve (3), if fitted

8. Engine air intake shut off valve

9. Air intake plenum for air induction channel

10. Idle air intake control device of engine

11. — Air intake valve if fitted equipment (5)

12. Air intake hood for turbine inlet filter house

13. Vent door: movable panels used to regulate air intake.

14. Passive vacuum cleaner nozzle with an air intake aperture

15. clean air (ambient air, intake air, charge air, inlet manifold) temperature sensors;

16. Conduits for heating, cooling and air intake circuits and water for vehicles

17. Air intake filters being parts for ventilating, air-conditioning or refrigerating apparatus

18. The nozzle front edge (106) is convex and promotes non-turbulent air intake.

19. Parts of vehicles, namely air-intake systems comprised of tubes, filters and manifolds

20. Air intake systems, including air cleaners and filters for cleaning air for engines

21. (ii) clean air (ambient air, intake air, charge air, inlet manifold) temperature sensors;

22. The invention relates to a catch box (1) for the alignment and easier connection of two air intake sections (9, 10) of an air intake system (6), in particular on a commercial vehicle.

23. The underpart of said water tank is provided with an air intake orifice (12).

24. Internal combustion engine air intake manifold with a retractable element having an acoustic bore

25. The relief valve (68) adjusts the air pressure of the air intake chamber (64).

26. Robust die cast aluminium frame and drip-proof louvered sheet metal air intake endcover (optional).

27. The auxiliary path compression chamber (P3) is provided with a second air intake port (B).

28. An air intake hood for channeling an incoming air flow downward in a filter house.

29. 4 A supercharger is any device that pressurizes the air intake to above atmospheric pressure.

30. The charged spray enters through the air intake valves at the beginning of the intake stroke.

31. Valve particularly intended to be set up in an air intake circuit of a heat engine

32. A throttle valve is attached to a first shaft (18) and rotates to regulate air intake.

33. Air intake hose for air supply to the combustion part of the engine comprising at least:

34. A sealing system may reduce gas leaks from a fuel conduit into the engine air intake.

35. The inner sleeve (20) is rotated to adjust air intake and the gas rotary switch synchronously.

36. The air supplementation pipe is provided with a third air intake port (C) and a first outlet.

37. (3) The air intake valve is the control valve for the pneumatic governor of the injection pump.

38. Up to 4% cash back  · Shop for Carburetors in Air Intake and Fuel Delivery

39. e The air intake valve is the control valve for the pneumatic governor of the injection pump.

40. (5) The air intake valve is the control valve for the pneumatic governor of the injection pump.

41. I knew of an air-intake shaft in the Reich Chancellery garden that ventilated the Fuhrerbunker below.

42. (7) The air intake valve is the control valve for the pneumatic governor of the injection pump.

43. 4 The air intake valve is the control valve for the pneumatic governor of the injection pump.

44. Data analysis and evaluation provided a valuable database and helped draft guidelines for helicopter air intake design.

45. Air distributor for an internal combustion engine and air intake system having an air distributor of this type

46. Vapor is returned to the air intake manifold of the engine by way of a vapor return conduit.

47. A perforated shield (40A, 40B) is clamped onto the tubes (16, 28) to enclose the air intake orifice.

48. The power is adjusted throughout the test to maintain the evaporator air intake temperature at a constant level.

49. If the water reaches the air-intake in the engine... we're going to, uh, lose all the power.

50. A tier of air exhaust orifices (13) are disposed inside the water tank upon the air intake orifice.

51. Carbon dioxide measurements taken at the air intake should be close to outdoor levels, otherwise exhaust is being entrained.

52. The kit HF 6061-NL fog lamps could be inserted into the air intake channels of the Hofele bumper.

53. Insiders say the front air intake, rounded but not necessarily elliptical, will be below the impact-absorbing front bumper.

54. The conveyor mesh belt (7) is located between the air return channel (22) and the air intake cavity (24).

55. Under each door is a small air intake to provide cooling for the oil tank and some of the electronics.

56. The lower housing has a first wall defining a plurality of air intake openings proximate the level of the fuel grate.

57. Carbon dioxide levels at the air intake should be close to outdoor levels, otherwise exhaust is being brought into the intake.

58. Air return partition boards (15) are arranged in the air return channel (22), corresponding to the air intake partition boards (11).

59. 15 Having located the air intake manifold we noticed a significant difference between the diagrams in the manuals and our engine.

60. A production/air intake shaft would also be sunk to a depth of 220 metres on the east side of Mink Arm.

61. In the case of an Areaway, the bottom of the air intake opening shall be at least 6 ft (2 m) above grade

62. The S&B Cold Air Intake with Oiled Cleanable Cotton Filter lets your 5.3L Silverado breathe free and unleash its full potential

63. The device extends downstream into the air intake duct and has an open inlet end for channeling the air-fuel mixture into the device.

64. An air intake passage (44) communicates with the ambient exterior and also communicates with the Venturi passage between its nozzle (50) and diffuser (52).

65. An apparatus assembly for an internal combustion engine, the apparatus including a liquid trap configured for fluid communication with an air intake conduit, to thereby receive at least a portion of condensation which forms within the air intake conduit when the conduit is feeding substantially humid, aftercooled and turbocharged air into an intake manifold of an internal combustion engine.

66. This Air Intake System has a Cleanable oiled filter that holds 130 grams of oil and has an efficiency rating of 99.05% for longer filter life

67. The S&B Filters KF-1063 Replacement Filter (Cleanable) is a Cleanable cotton 8-ply filter for your S&B Cold Air Intake System

68. Where to Buy You can find a full selection of Bama Custom Tunes including Bama Tuners, Cold Air Intake & Tuner Combos and more at AmericanMuscle.com

69. Should the concentration of pollutants exceed a maximum level, the system automatically closes off air intake from outside and temporarily recirculates the air in the cabin.

70. Air intake vents located at ground level or near vehicles or other combustion sources can spread contaminants to all areas served by the air handling system.

71. Typically steel 55-US-gallon (210 L) drums are used as burn barrels, with air vent holes cut or drilled around the base for air intake.

72. A gas burner includes a burner tube (16) that has a gas supply tube (28) extending into one end and an air intake orifice (26) adjacent thereto.

73. This new ramjet consists of an air intake port (11), a diffuser stage (12), a fuel source (13), a combustion stage (14), and an exhaust nozzle (15).

74. No more fiddling around with air-intake vents or pushing around hot coals; Billows monitors the ambient probe (the one that measures the grill’s temperature) and uses

75. Even at the maximum levels measured in marine air, intake of boron through inhalation is likely to be negligible compared with that ingested in food and water.

76. The bottom of the air intake opening from the Areaway into the building shall be at least 3 ft (1 m) above the bottom of the Areaway

77. The S&B Cold Air Intake With Oiled Cleanable Cotton Filter has been manufactured out of heavy-duty material to ensure maximum durability and long-lasting use

78. The self-adjusting air intake comprises a supersonic area, a neck, a subsonic area and at least one additional channel connecting the supersonic area to the subsonic area.

79. The J-10 has a rectangle belly air intake, with low-mounted delta wings, a pair of front canard wings, a large vertical fin, and two under fuselage fins.

80. The rear panel comes with a pre-installed 120 mm fan to provide excellent Airflow, and the vents near the front panel ensure direct air intake to the graphics card