Đặt câu với từ "air bleed valve"
1. The test set operates both the bleed valve and solenoid valve independently.
2. Air release valve
3. Air inlet valve
4. Air relief valve
5. Gas turbine engine two degree of freedom variable bleed valve for ice extraction
6. These air Bleeders should be easily accessible, and depending on the type of air bleeder valve will depend on the tool or key need to bleed the air from the radiator or baseboard
7. Air release valve for compression bag and compression bag with air release valve
8. Combination air release valve
9. Snorkel air inlet valve
10. Air-relief valve assembly
11. c) failure of bleed air leak detection system
12. An air release valve
13. (c) failure of bleed air leak detection system.
14. Air inlet valve for an airplane and manufacturing method for an air inlet valve
15. Odour trap with check valve and air admittance valve
16. (ii) Hot bleed air leak resulting in structural damage.
17. Air valve for spray gun
18. Control Valve Air lock Relay Principle
19. Refrigerator having an air-admission valve
20. Air hose with pressure relief valve
21. Engine air intake shut off valve
22. liter air reservoir with drain valve
23. litre air reservoir with drain valve
24. Valve damaged or excessive air leak.
25. Air intake valve (7), if fitted
26. Air intake valve (3), if fitted
27. Integrated charge air and egr valve
28. Air stop valve of airtight body
29. Trapped air release valve for tents
30. PVC Air Admittance Valve with 20 DFU Branch and 8 DFU Stack (2-Pack) Oatey's Air Admittance Valve is a 1-way valve Oatey's Air Admittance Valve is a 1-way valve designed to allow air to enter the plumbing drainage system when negative pressure develops in the piping system
31. Valves and valve fittings for tyres, such as metal and plastic valves, tubeless valves, valve patches, valve caps, valve extensions, connections for filling and releasing air from air tyres, attachable nipples
32. Air Admittance Valve Trap Assembly Kit with 1-1/2 inch Tuuber Vent 2x Superior Seal Air Admittance Valve
33. hot bleed air leak resulting in fire warning or structural damage
34. Control valve for automatic compressed-air brakes
35. (a) Valve damaged or excessive air leak.
36. — Air intake valve if fitted equipment (5)
37. Air to air aftercooler heated bypass with load sensing switching valve
38. Control valve for a charge air circuit
39. 30-litre air reservoir with drain valve
40. 30 litre air reservoir with drain valve
41. 30 liter air reservoir with drain valve
42. a) hot bleed air leak resulting in fire warning or structural damage
43. Valves and valve fittings for tyres and flexible pipes, such as metal and plastic valves, tubeless valves, valve patches, valve caps, valve extensions, connections for filling and releasing air from air tyres, attachable nipples
44. The present invention provides an air inlet valve (2) for an airplane and a manufacturing method for an air inlet valve.
45. Device for opening a valve, particularly an air inlet valve or gas outlet valve of a fermentation or digestion tank
46. Shut valve to auxiliary engines and emergency air.
47. The pump sucks air out through this valve.
48. Control valve for an air conditioner, and air conditioner for a vehicle
49. Open the air inlet valve to supply compressed air to the machine
50. R1 = 30 litre air reservoir with drain valve
51. The pump sucks air out through the valve.
52. An air reservoir valve selectively controls air flow into and out of the air reservoir.
53. A vent valve, an integrated air pump comprising the vent valve and an electronic sphygmomanometer.
54. Device for opening a valve, especially an air-inlet valve or a gas-leak valve of a fermentation or digestion tank
55. The electrical power and cooling unit is pneumatically driven by engine bleed air.
56. Fuel tank relief valve setting (air ingestion and relief);
57. Fasteners for vehicle engine components, namely air cleaner studs, engine manifold fasteners, air conditioner (AC) element brackets, valve cover studs, and valve cover spacers
58. (3) The air intake valve is the control valve for the pneumatic governor of the injection pump.
59. The pilot valve (44) permits air pressure to flow to an actuator which opens the drain valve.
60. Packaging for metal-air batteries with hydrogen release valve
61. (7) The air intake valve is the control valve for the pneumatic governor of the injection pump.
62. 4 The air intake valve is the control valve for the pneumatic governor of the injection pump.
63. The compressed air control valve (1) is connected to the main air duct (2).
64. The relief valve (68) adjusts the air pressure of the air intake chamber (64).
65. e The air intake valve is the control valve for the pneumatic governor of the injection pump.
66. (5) The air intake valve is the control valve for the pneumatic governor of the injection pump.
67. Method for control of air intake and valve for air intake and its application
68. Air inlet and relief valve (17, 20) may also be provided as an integral part of the valve.
69. An air relief valve for use with an irrigation pipe.
70. Spool valve for switching air flows between two adsorption beds
71. Absolute throttle position/intake air throttle position (position of valve used to regulate intake air)
72. absolute throttle position / intake air throttle position (position of valve used to regulate intake air)
73. Absolute throttle position / intake air throttle position (position of valve used to regulate intake air)
74. Aerodynamics are improved due to the lack of bleed air vent holes on the wings.
75. An Air Admittance Valve is a 1-way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system
76. Description of fuel tank relief valve setting (air ingestion and relief): ...
77. Idle air control valve wire stress relief feature and assembly aids
78. The pump sucks air out ( of the vessel ) through this valve.
79. Charge air valve system for use in an internal combustion engine
80. Lavatory water storage tanks are pressurized by bleed air that is fed through a pressure regulator.