1. Thermal modification in soybean oil increased the wettability of the surface to water (reduced contact angle).

2. The surface wettability, (contact angle), amount of oil uptake, water absorption and thickness swelling were determined thereafter.

3. Anschluss translations: connection, line, connection, contact, contact, connection, connection

4. Anschluss translate: connection, line, connection, contact, contact, connection, connection

5. Contact person address – line 2

6. Positioned on the high loaded Countershaft and always in contact with dirt and water the oil seal can easily start leaking

7. Oil will float on water.

8. Oil and water don't mix.

9. Coning may be further prevented by monitoring the oil/water contact and by adjusting the rates at which the two zones are produced.

10. Geometry of overhead contact line for AC systems

11. Oil and water do not mix.

12. Oil and water do not blend.

13. Increasing the force holding the droplets in contact (centrifuge, fiber mat) will enhance Coalescence, as will bringing the droplets into contact with a surface that will wet with oil but not water

14. Super absorbent oil and water performance.

15. Oil and water will not unite.

16. Oil does not blend with water.

17. Oil and water are not miscible.

18. Water does not blend with oil.

19. After eye contact: rinse out with water.

20. Contact Us Arrowhead® Brand Spring Water

21. Engine: Is oil level above the “ADD” line?

22. Method of reducing water in oil wells

23. It resists air, oil, and water penetration.

24. 4 Oil and water will not intermingle.

25. Water soluble fluids blend oil with emulsifiers and additives to create an oil-based Coolant to be diluted with water

26. The oil-water separating apparatus including the oil-water separating structure can be repeatedly used, thereby preventing additional environmental contamination.

27. HARMONIC CHARACTERISTICS AND RELATED OVERVOLTAGES ON THE OVERHEAD CONTACT LINE

28. To make soap, you need 3 main things : oil things: oil, water and lye.

29. A method of reducing water in oil wells.

30. Oil has the property of floating on water.

31. Removing oil from water, monitoring of adsorbent saturation

32. Check the oil and water before setting off.

33. In an injection system, oil is Alternately injected with water, and each round of oil is followed by a round of water

34. IPOL Antirust LR PC 100 is an emulsifiable oil which can provide an oil-in-water emulsion with water in continuous phase

35. 4 Ingredients: coconut oil soap, palm oil soap, glycerol, olive extract, natural flavor, pigment, water.

36. Algal oil is a vegetarian DHA oil that does not come from cold-water fish

37. BASTARD TURNED OFF THE MAIN WATER LINE.

38. Then , it analyzes the irreducible water existence style, original oil saturation and minimum oil - radius.

39. 23 From the point of view of the contact line and the meshing limit line, the contact performance of double enveloping TI (Torioidal Involute) worm gearing is analysed.

40. You can mix this paint with water or oil.

41. 2 It drinks blood coconut water and palm oil.

42. Oil or water may be added to ease cooking.

43. A crude oil slick quickly spreads out over water.

44. 7 Check the oil and water before setting off.

45. Titermax Adjuvant forms a microparticulate water-in-oil emulsion with a copolymer and metabolizable squalene oil

46. This chemical is liable to explode on contact with water.

47. The chemical is liable to explode on contact with water.

48. Hey, get the water line off the toilet.

49. Oil colours, water colours, acrylic colours, pastels, paints for airbrushes

50. These saws normally use an oil / water emulsion as lubricant.

51. Choose water-packed canned tuna over the oil-based variety.

52. When oil and water mix, are easy to tell apart.

53. An oil-in-water emulsion containing an ascorbic acid compound

54. Process for reducing the production of water in oil wells

55. Water-soluble processing oil for free-abrasive-grain wire saw

56. 7 Ingredients: Fish oil , Gelatin. Glycerin,(www.Sentencedict.com) and USP water.

57. Water-in-oil emulsions having a higher water-to-oil ratio can be formed with the same formulation by using the glycerol monofatty acid ester cosurfactant.

58. Considered a dependable and cheap way to remove oil, grease and other hydrocarbons from water, oil skimmers can sometimes achieve the desired level of water purity.

59. Energising water for the body, scented water, eau de toilette, oils for toilet purposes, almond oil

60. A Bottler canfill cans or capsules with water, Liquid Honey, AppleJuice, Seed Oil, Biomass, Biofuel, Oil, Fuelor lava

61. Californium is used in moisture gauges for the determination of water and oil-bearing layers in oil wells.

62. Mix Cassia powder in plastic bowl with WARM water and your choice of oil; I recommend Shea oil

63. The ROSF Series Fiberglass Coalescing Oil Water Separators are designed for above grade applications where a high performance Coalescing oil water separator is desired using Coalescing media

64. On the morning of the 15th, oil slicks were spotted, but sound contact was lost.

65. Installations for the collection of oily water and used oil stores

66. Vacuum and centrifuge: oil can be sucked up along with the water, and then a centrifuge can be used to separate the oil from the water – allowing a tanker to be filled with near pure oil.

67. Water soluble thickening agents for use in the oil well industry

68. • description of abandoned or existing wells (water, oil, gas, injection wells);

69. Trap, pressure air system consisting of water or the moisture yoğuşmasıyla water / oil mixture allows the discharge.

70. Oil / Vinegar Cruet / Water Bottle with Wire Bail Lid - 6/Case

71. When the eggs make contact with water, they hatch, freeing the parasites.

72. In addition, the method of the present invention for drying organic waste having high water content comprises: feeding organic waste having high water content; bringing the fed waste into direct contact with a heat-transfer oil for drying; adiabatically compressing evaporative gas generated when the waste is dried; heating the heat-transfer oil used to dry the waste by the adiabatically compressed evaporative gas; condensing and cooling the evaporative gas used to heat the heat-transfer oil; and separating the condensed evaporative gas into oil and water.

73. Aeros (Airborne Robotic Oil Spill Recovery System) is a fleet of airplane-deployed robots that cordon off the oil and use centrifuge-like oil/water separators to collect oil for refining.

74. Get contact details & address of companies manufacturing and supplying Attar, Ittar, Attar Oil across India.

75. Fresh, oxygenated waters can cause extensive aerobic Biodegradation when they are in contact with reservoir oil

76. AbsorbentsforLess.com is your wholesale source for water snake moisture absorbers, water absorbing tubes, absorbent socks and oil booms

77. Replaced recycled process water pipeline with an above ground line.

78. A sealing surface is positioned adjacent the polygonal guiding surface and forms a line contact seal at an interface with the sprinkler when the water seat is in an active position.

79. Kuwait proposes to install a network of monitoring wells in five oil fields between the oil wells and water wells.

80. Oil biodegradation occurred in both the oiled sediment and the fine oil-mineral aggregates washed into the water by waves.