1. A kingpin inclination angle is detected or measured.

2. (21)The velocity and angle values shall be measured continuously.

3. The method includes dynamically determining a selected measured depth, measured depth interval, and/or azimuthal projection angle.

4. Methods:The twist angle and eversion angle were measured on 81 sets(male 41 and female of tibiae.

5. 7 He measured the angle of incidence of the reflected light.

6. The Azimuthal angle is an angle measured from the -axis in the -plane in spherical coordinates, denoted in this work.

7. We measured the roof angle of 183 knee joints by plain film radiography.

8. The tilt table angle shall be measured with an accuracy of better than 0,3°.

9. Azimuth is the angle a line makes with a meridian, measured clockwise from north

10. Width of the Camera's view angle, measured in degrees along the local Y axis.

11. The elevation angle is the angle between the horizontal plane and the line of sight, measured in the vertical plane. The Greek letter Epsilon (ε) describes the elevation angle.

12. The Azimuthal angle is an angle measured from the x-axis in the xy-plane in spherical coordinates, denoted theta in this work.

13. Secondary variables: spark angle, A/F ratio and mass air-flow (measured or calculated) (50) :

14. All Bombsights attempt to solve the problem of when to release the bomb—usually expressed as the range angle, the angle as measured between …

15. The divergence angle between visual units as measured by these functional methods (10.3 °) is close to the anatomical entrance angle for the ommatidia (10.5 °).

16. The departure angle shall be measured in accordance with Item 6.11 of Standard ISO 612:1978.

17. Azimuths An azimuth is defined as a horizontal angle measured clockwise from a north base line

18. The pitch angle used for the geometrical assessment above shall be measured as in paragraph 5.2.3.4.

19. The approach angle shall be measured in accordance with Item 6.10 of Standard ISO 612:1978.

20. From the measured torque-twisting angle curve, the stress-strain curvekf(φ) has to be calculated.

21. Slide: Machine or remove the breech face at an angle of between 45 and 75 degrees as measured from the angle of the original face.

22. the change in the angle of inclination measured during the lateral stability test must not exceed 5°;

23. The departure angle shall be measured in accordance with paragraph 6.11 of international standard ISO 612:1978.

24. The target angle (α) is calculated from said measured values (R1, R2) according to the trilateration method.

25. The release potential, mechanical properties, surface tension, and contact angle of the cross-linked polymer were measured.

26. 3.1.2. the change in the angle of inclination measured during the lateral stability test must not exceed 5°;

27. (b) the change in the angle of inclination measured during the lateral stability test does not exceed 5o;

28. Slide (for automatic pistols): Machine or remove the breech face at an angle of between 45 and 75 degrees as measured from the angle of the original face.

29. the plane touching the upper edge of the plate and forming an angle measured upwards of #° with the horizontal

30. This dependence of the reflected light intensity from the incident angle is measured with a high-resolution sensor array.

31. The Azimuth is the angle between North, measured clockwise around the observer's horizon, and a celestial body (sun, moon)

32. These measurements and the varied or different acceptance angle ranges can then be employed to determine a measured angle of incidence and/or angular content for an ion beam.

33. — the plane touching the upper edge of the plate and forming an angle measured upwards of 15° to the horizontal;

34. the plane touching the upper edge of the plate and forming an angle measured upwards of 15° to the horizontal,

35. the plane touching the upper edge of the plate and forming an angle measured upwards of 15° with the horizontal,

36. — the plane touching the upper edge of the plate and forming an angle measured upwards of 15° to the horizontal,

37. The offcut thickness, and the blade thickness and grinding angle were varied and the fracture, plastic and friction energies measured.

38. –the plane touching the upper edge of the plate and forming an angle measured upwards of 15° to the horizontal;

39. The angle of obstruction of each ‘A’ pillar shall be measured by superimposing in a plane the following two horizontal sections:

40. The angle of obstruction of each A pillar shall be measured by superimposing in a plane the following two horizontal sections

41. Several material parameters were also measured, such as spiral grain angle, shrinkage in all three directions, annual ring width and density.

42. The angle of obstruction of each A pillar shall be measured by superimposing in a plane the following two horizontal sections:

43. Over this band of frequencies, resistance calculations have a dynamic range of 20∶1, while phase angle is measured between ±90°.

44. In 1884 the parallax angle was measured as 0′′.322 ± 0′′.023, which is larger than the modern value of 0′′.205.

45. Translational forces were measured by the deflection angle test (ASTM F2052-02), and rotational forces assessed on a 5-point qualitative scale.

46. Angle gauges, angle indicating apparatus, angle indicating devices, angle plates

47. Although you had four Crosspieces, navigators would typically use only one at a time, based on the height of the angle being measured

48. In this experimental investigation the angle of friction was studied and its dependence on the loading conditions and the polymerization time was measured.

49. The translational forces were measured using the deflection angle test (ASTM F2052-02); rotational forces were assessed on a 5-point qualitative scale.

50. In planetary dynamics, the Apsidal angle is the angle between the directions of closest approach (the apse) of two planets, as measured from the origin of the coordinate system (usually the center of the star)

51. Angle synonyms, Angle pronunciation, Angle translation, English dictionary definition of Angle

52. For the purposes of 9E003.c., 'incidence angle' is the acute angle measured between the plane tangential to the aerofoil surface and the hole axis at the point where the hole axis enters the aerofoil surface.

53. The change in plumb-line angle against a known object—such as a star—could be carefully measured on opposite sides of the mountain.

54. Powders stopping angle (PSA) is an important performance factor about powders mechanics, but its measured data generally shows a large undulation with traditional measuring method.

55. The torque required to rotate the parts at a predetermined angle can be measured and used to check whether the desired frictional engagement is achieved.

56. Ballotin trays and pads measure a bit larger at the top, due to the angle of the Ballotin boxes (which are measured at their bottom)

57. Angle BCA, angle BCD, and angle DCE, they're all congruent

58. Display voltage, measured voltages, preset measured current measurement efficiency.

59. The narrow cross-section end of the optical fiber pen allows the radiation coming from the measured object to be detected in a large solid angle.

60. By means of a Shift Comparator the difference in the angle between the two fragments before and during application of the deflecting force can be measured.

61. High/low blade angle, reverse angle, angle of attack, rotational speed;

62. Angle-irons, angle-grooves and angle-stanchions made out of metal

63. You start by teaching angles -- an acute angle, a right angle, an obtuse angle, a straight angle.

64. The horizontal angle of the observer's bearing in surveying, measured clockwise from a referent direction, as from the north, or from a referent celestial body, usually Polaris.

65. The entire aperture range shows a consistent result at which the highest measured distortion is a maximum of 0.48 % found in wide angle. No reason to worry.

66. From the change in altitude, the change in the angle in inclination for the distance travelled is calculated and used to correct the measured magnetic field strength.

67. Mathematics on the corner there is an obtuse, straight angle, acute angle, right angle, the students, what angle ah?

68. So what angle in this triangle -- does any angle here equal that angle?

69. For side AC the opposite angle is angle ABC and for side AB the opposite angle is angle ACB

70. Angle ABC is Adjacent to angle CBD

71. the two vertical planes touching the two lateral edges of the plate and forming an angle measured outwards of 30° to the longitudinal median plane of the vehicle,

72. Angle Meter The Angle Meter application is a tool for measuring Angle or inclination

73. Or “measured section.”

74. While offset was measured in millimeters, the Backspace is measured in inches

75. the two vertical planes touching the two lateral edges of the plate and forming an angle measured outwards of #° in relation to the longitudinal median plane of the vehicle

76. I want to prove angle ABC = angle ACB

77. 5 The atomization angle, which affects the air and fuel mixture, combustion and emission of engine,[www.Sentencedict.com] can be measured by digital image processing with concentration fields measurement system.

78. Angle C and Angle 3 cannot be entered

79. All Bombsights attempt to solve the problem of when to release the bomb—usually expressed as the range angle, the angle as measured between a vertical line through the aircraft and the line of sight to the target when the bomb is to be released.

80. But this angle theta is a very small angle.