Nghĩa của từ test pressure bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-áp lực thí nghiệm
-áp suất thử nghiệm

Đặt câu có từ "test pressure"

Dưới đây là những mẫu câu có chứa từ "test pressure", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ test pressure, hoặc tham khảo ngữ cảnh sử dụng từ test pressure trong bộ từ điển Từ điển Anh - Việt

1. Test pressure ... bar/kPa gauge(73)

2. Key words : concrete, fissure, injection, water test, pressure, acoustical emission.

3. The test pressure for shells intended for the carriage of gases of #° having a critical temperature of # °C or above will be

4. he test pressure for tanks intended for the carriage of liquefied gases having a critical temperature of # ° C or above will be

5. The test pressure for tanks intended for the carriage of liquefied gases having a critical temperature of 70 °C or above will be:

6. The test pressure for tanks intended for the carriage of liquefied gases having a critical temperature of 70 °C or above shall be:

7. The test pressure for tanks intended for the carriage of liquefied gases having a critical temperature of 70° C or above will be:

8. he test pressure for tanks intended for the carriage of low pressure liquefied gases having a critical temperature of # ° C or above will be

9. (3) The test pressure for shells intended for the carriage of gases of 2° having a critical temperature of 70 °C or above will be:

10. The test pressure for tanks intended for the carriage of low pressure liquefied gases having a critical temperature of 70° C or above will be:

11. By derogation from this requirement, the test pressure for the manifold of battery-wagons or MEGCs shall not be less than 300 bar for UN 1001 acetylene, dissolved.

12. By derogation from this requirement, the test pressure for the manifold of battery-vehicle or MEGC shall not be less than 300 bar for UN No 1001 acetylene, dissolved.

13. Except for UN 1001 acetylene, the maximum permissible stress σ of the manifolding arrangement at the test pressure of the receptacles shall not exceed 75 % of the guaranteed yield stress of the material.

14. Except for UN No 1001 acetylene, dissolved, the permissible maximum stress of the manifolding arrangement at the test pressure of the receptacles shall not exceed 75 % of the guaranteed yield strength of the material.