Nghĩa của từ offset tool face bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-mặt trước dao cắt cong

Đặt câu có từ "offset tool face"

Dưới đây là những mẫu câu có chứa từ "offset tool face", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ offset tool face, hoặc tham khảo ngữ cảnh sử dụng từ offset tool face trong bộ từ điển Từ điển Anh - Việt

1. The final change to the tool offset display is the addition of the " Pocket- Tool " table here in the " Tool Offset " box

2. We'll be using Tool one and Work Offset 54

Chúng tôi sẽ sử dụng công cụ một và làm việc bù đắp 54

3. " Offset " pages until I can see the tool offsets

" Bù đắp " trang cho đến khi tôi có thể thấy công cụ offsets

4. Except that we have added this column for tool type in the " Tool Offset " box

Ngoại trừ rằng chúng tôi đã thêm cột này cho các loại công cụ trong hộp " Công cụ bù đắp "

5. With the tool number and offset selected, press [ CYCLE START ]

Với công cụ số và bù đắp được chọn, nhấn [ chu kỳ bắt đầu ]

6. I put the cursor on the length offset for tool 1

Tôi đặt con trỏ trên các chiều dài bù đắp cho công cụ 1

7. Same on the tool offset page, [ F3 ] to restore all offsets

Giống nhau trên công cụ bù đắp trang, [ F3 ] để khôi phục lại tất cả offsets

8. For example, this program uses four tool offsets and one work offset

Ví dụ, chương trình này sử dụng bốn công cụ offsets và bù đắp một công việc

9. The Wheel Backspace to Offset calculator is an EZ tool to convert a wheels given Backspace and rim width to an offset

10. I can go to the " Offset " screen and there are my four tool offsets

Tôi có thể đi đến màn hình " Bù đắp " và có offsets bốn công cụ của tôi

11. Notice the " Tool Offset " box is white and the rest of the boxes are colored

Thông báo " Công cụ bù đắp " hộp là màu trắng và phần còn lại của các hộp được tô màu

12. "Wheel offset" means the distance from the hub abutment face to the centre

13. Radial depressions that are offset at an angle are situated on the inner face and outer face of the receiving chamber.

14. Now I just need to press the [ TOOL OFFSET MEASURE ] key to start the automatic probing options

Bây giờ tôi chỉ cần bấm phím [ công cụ bù ĐẮP biện pháp ] để bắt đầu tự động tùy chọn thăm dò

15. ‘Wheel offset’ means the distance from the hub abutment face to the centre line of the rim.

16. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim."

17. Wheel offset means the distance from the hub abutment face to the centre line of the rim

18. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim. "

19. 2.3.2. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim.

20. Steering motor speed may be increased or decreased to adjust tool face orientation.

21. Offset wrenches

22. Compensate: To offset; counterbalance

23. Offset Cantilever Hanging Patio Umbrella

24. Countertrade & Offset is an essential resource for anyone active in the offset and Countertrade industries

25. Barbeques Charcoal, gas, pellet, offset …