Nghĩa của từ indicated horse power bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: điện
-mã lực chỉ báo
Đặt câu có từ "indicated horse power"
1. Power absorbed at various indicated engine speeds:
2. The crew indicated a total loss of electrical power.
3. Much power of the horse underneath that hood.
Sức mạnh của 1 chú ngựa nằm bên dưới cái mui xe đó.
4. Power absorbed at indicated engine speeds (as specified by the manufacturer):
5. Power absorbed at indicated engine speed (as specified by the manufacturer)
6. If power supply output is normal, a defective galvanometer circuit or power supply output circuit is indicated.
7. We must first calculate the horse-power needed to propel the ship.
8. power absorbed by auxiliaries to be fitted as indicated in Annex II, Appendix #, Section
9. The power estimation processes are adapted based on the signal activity indicated by the JVADAD.
10. Adjust the power absorption unit to reproduce the corrected total track torque indicated in paragraph # above
11. power absorbed by auxiliaries to be fitted as indicated in Annex II, Appendix 1, Section 6.1
12. = power absorbed by auxiliaries to be removed as indicated in Annex 1, Appendix 1, paragraph 6.2.
13. power absorbed by auxiliaries to be fitted as indicated in Annex 1, Appendix 1, paragraph 6.1.
14. Adjust the power absorption unit to reproduce the corrected total track torque indicated in paragraph #.#.#.#.# above
15. power absorbed by auxiliaries to be removed as indicated in Annex II, Appendix 1, Section 6.2
16. Failure of the normal power supply of the alarm system shall be indicated by an alarm.
17. Failure of the normal power supply of the alarm system shall be indicated by an alarm
18. Adjust the power absorption unit to reproduce the corrected total track torque indicated in paragraph #.#.#.#.#. above
19. .2.2Failure of the normal power supply of the alarm system shall be indicated by an alarm.
20. Adjust the power absorption unit to reproduce the corrected total track torque indicated in paragraph 5.2.1.2.7. above.
21. .2.2 Failure of the normal power supply of the alarm system shall be indicated by an alarm.
22. 2.2 Failure of the normal power supply of the alarm system shall be indicated by an alarm..
23. Adjust the power absorption unit to reproduce the corrected total track torque indicated in paragraph 5.2.1.2.7 above.
24. P(b)= power absorbed by auxiliaries to be removed as indicated in Annex II, Appendix 1, Section 6.2
25. P(a)= power absorbed by auxiliaries to be fitted as indicated in Annex II, Appendix 1, Section 6.1