Nghĩa của từ dry density bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-dung trọng khô
-trọng lượng riêng khô
@Lĩnh vực: giao thông & vận tải
-tỷ trọng khô (đất)

Đặt câu có từ "dry density"

Dưới đây là những mẫu câu có chứa từ "dry density", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ dry density, hoặc tham khảo ngữ cảnh sử dụng từ dry density trong bộ từ điển Từ điển Anh - Việt

1. Soils with a low dry density have a lower air-entry value and residual matric suction than soils with a high dry density.

2. After testing, the microstructure and dry density of each specimen was determined.

3. The average absorption depends on the oven-dry density and can be predetermined.

4. A highly significant negative correlation was found between bark thickness and oven-dry density.

5. The oven-dry density of the remaining part of increment core was examined for additional control.

6. Dry wood calibrations demonstrated strong predictive relationships with R2p ranging from 0.87 (air-dry density) to 0.95 (stiffness).

7. VL was related positively to air-dry density, and negatively to static shear modulus (Longitudinal-Tangential and Longitudinal-Radial planes).

8. Twenty Pinus taeda L. (loblolly pine) radial strips were characterized in terms of air-dry density, microfibril angle (MFA), and stiffness.

9. Relationships between measured and NIR estimates for green wood were good; coefficients of determination (R2) ranged from 0.79 (MFA) to 0.85 (air-dry density).

10. NIR spectroscopy has the potential to predict the air-dry density, MFA, and stiffness of 10-mm sections of green P. taeda wood samples.

11. EL was very highly related to EF, MOE, MOR and air-dry density, whereas the relationship between VL and static moduli was highly significant, but less strong.

12. Results indicate that multiple linear regression, with unconfined compressive strength as a function of Los Angeles abrasion loss, dry density, and absorption, yields a useful predictive equation (adjusted R2=0.729) for the rocks studied.

13. Second-cycle slake-durability index (Id2) was used as a measure of durability, whereas clay content, clay-mineral composition, texture, microfracture frequency, absorption, adsorption, dry density, void ratio, and Atterberg limits were used to characterize mudrock lithology.

14. Backfill shall be compacted to at least 95% of the maximum dry density (obtained at optimum moisture content plus or minus 3% for silt or clay with no required moisture content for sand) as determined by ASTM D-698