Nghĩa của từ design temperature difference bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-hiệu nhiệt độ tính toá
Đặt câu có từ "design temperature difference"
1. ‘temperature coefficient’ (C) means a correction factor that accounts for the difference in operating temperature;
2. Approach — The approach is the difference in temperature between the cooled-water temperature and the entering-air wet bulb temperature (twb).
3. The difference between body and ambient temperature increases with age (Fig.
4. > 20 degr difference between measured and modelled intake air temperature
5. Results The difference of temperature of the muffle oven was proportio...
6. In most simple systems this is the "log mean temperature difference" (LMTD).
Trong một hệ thống đơn giản nhất thì đây là "hiệu số nhiệt độ trung bình" (LMTD).
7. D0170 Degree-days Algebraic difference, expressed in degrees, between the mean temperature of a particular day and a reference temperature.
8. Quantitatively studies the variable condenser water flow controlled by the constant temperature difference and the temperature of the entering water.
9. Actomyosins because of the difference of optimal temperature of gelation among those Actomyosins
10. The difference lies, however, in the design of the aeration system.
11. Hence, it is generally good to have a large temperature difference for this process.
12. To alleviate this, the Allowed Temperature Difference setting will allow the Acclimater to release its contents within a certain range of temperature
13. A cold front with a large temperature difference is often marked by violent thundersqualls.
14. One of the best technologies to use when there is a temperature difference between the internal target temperature and the surrounding temperature (∆T≥10°C) is air to air technology.
15. By theoretical calculation, it is found that the same earth temperature gradient leads to the greater difference of temperature stress in different kind of rocks.
16. On the basis of theoretic analysis of the difference of temperature between gas and preform, an equation was deduced to describe the relationship of temperature...
17. Like all Cyclonic valves, the STDC Series is built with the Cyclonic Design Difference
18. For the purpose of ready identification, actual temperature levels are expressed in degrees Celsius (°C) whilst temperature difference (interval or gradient) is expressed in Kelvins (K).
19. The camel’s elevated temperature also lessens its absorption of heat, which of course depends on the difference between the temperature of its body and that of the environment.
20. The purpose of these depressions is uncertain, but their depth, design, and orientation with respect to wind and sun creates a temperature difference of as much as 15 °C (27 °F) between the top and the bottom.
Mục đích của những bậc thang này là chưa rõ, nhưng độ sâu, thiết kế và hướng của chúng đối với gió và mặt trời tạo ra sự chênh lệch nhiệt độ lên đến 15 °C (27 °F) giữa đỉnh và đáy.
21. There is a significant difference in accuracy attainable for differential versus an absolute temperature comparison using a thermocouple.
22. On the basis of theoretic analysis of the difference of temperature between gas and preform, an equation was deduced to describe the relationship of temperature between gas and p...
23. Compares the start-up period and the heating characteristics of the first stage machines under two regress temperature difference.
24. A new structure MEMS thermal flow sensor combining two principles of temperature-difference and anemometer is designed and manufactured.
25. The difference between an Arbored vs non-Arbored hole saw lies in the arbor or shank design